Rae Systems Gas Detectors and Monitors from JM Test Systems

JM Test Systems is Your Leading Stocking Distributor of Rae Systems Gas Detectors and Monitors. We are also an Authorized Repair and Calibration Center for RAE Systems.   BUY OR RENT FROM JM TEST SYSTEMS.

Rae Systems Product Lines

Using RAE Systems Colorimetric Gas Detection

PORTABLE DETECTION

Rae Tubes & Pumps

RAE Systems Colorimetric Gas Detection Tubes available at JM Test Systems

Colorimetric Gas Detection Tubes
RAE Systems’ large selection of Colorimetric Gas Detection Tubes offer quick, on-the-spot measurements of many gases and vapors at low cost. The tubes are easy to read with a sharp, clear color change and provide accuracy with no need for calibration.

Click here for more information and specifications.

    Rae Single Gas

    RAE Systems ToxiRAE 3 single-gas monitor available at JM Test Systems

    ToxiRAE 3 Badge Monitor
    The ToxiRAE 3 is a full-featured single-gas monitor that offers unequaled cost of ownership value. The ToxiRAE 3 is compatible with the AutoRAE Lite bump and calibration station. STEL, TWA, low, and high alarms can also be recorded. The detector is warranted for 2 years and maintenance free with replaceable battery.

    Click here for more information and specifications.

    Click here for ToxiRae 3 User Manual.

     

     

    RAE Systems ToxiRAE Pro - Wireless Personal Monitor for Toxic Gases and Oxygen available at JM Test SystemsToxiRAE Pro Badge Monitor
    The ToxiRAE Pro is the world’s first wireless personal monitor for toxic gases and oxygen. The ToxiRAE Pro takes worker protection to the next level by providing safety professionals wireless access to real-time instrument readings and alarm status from any location for better visibility and faster response. The ToxiRAE Pro can detect a broad range of gases—from carbon monoxide, hydrogen sulfide, and oxygen to ammonia, chlorine, and phosgene. The ToxiRAE Pro’s intelligent interchangeable sensors store calibration data, so if you need to monitor one gas one day and another gas the next, swapping the sensors in your ToxiRAE Pro is all it takes.

    Click here for more information and specifications.

    MULTI-GAS

    RAE Systems AreaRae Steel Wireless Multi-gas Monitor  available at JM Test Systems

    AreaRAE Steel
    The AreaRAE Steel is an ATEX-certified Multi Gas, wireless monitor. Housed in a welded stainless-steel enclosure, it is rugged, portable and weather-resistant, making it suitable for harsh environments. Ideal for hazardous materials and other emergency response monitoring applications, strategically placed AreaRAE Steel monitors can be used to quickly establish a perimeter, allowing first responders to back off to a safe position and monitor readings from up to 3 kilometers away.

    Click here for more information and specifications.

    RAE Systems QRAE II Pump available at JM Test Systems

    QRAE II Pump
    The QRAE II is available as a diffusion or pumped one-to-four gas monitor for detection of combustibles, oxygen, hydrogen sulfide, carbon monoxide, or sulfur dioxide.

    Key features include an easy-to-change battery pack, a water-resistant case and a new state-of-the-art O2 sensor.

    Click here for more information and specifications.

    QRAE II Diffusion
    The QRAE II is available as a diffusion or pumped one-to-four gas monitor for detection of combustibles, oxygen, hydrogen sulfide, carbon monoxide, or sulfur dioxide.

    Key features include an easy-to-change battery pack, a water-resistant case and a new state-of-the-art O2 sensor.

    Click here for more information and specifications.

    RAE Systems MultiRAE IR PID and CO2 sensor available at JM Test Systems

    MultiRAE IR
    The MultiRAE IR combines a PID (Photoionization Detector) and Carbon Dioxide (CO2) sensor with O2, LEL, and one specific toxic gas sensor in one compact monitor with sampling pump. The MultiRAE IR’s versatility allows it to replace a wide range of monitors, saving training and maintenance costs. The MultiRAE IR is quickly and easily changed from a sophisticated technician instrument to a simple text or display only monitor. The same monitor can be used as a personal monitor, a hand-held sniffer or as a continuous, operational area monitor for use in applications such as indoor air quality and industrial hygiene.

    Click here for more information.

    PID (Photoionization Detectors)

    RAE Systems MiniRAE 3000 handheld VOC detector available at JM Test Systems

    MiniRAE 3000
    The MiniRAE 3000 is the most advanced handheld volatile organic compound (VOC) detector on the market. Its Photoionization Detector’s (PID) extended range of 0 to 15,000 ppm makes it an ideal instrument for applications from industrial hygiene, to leak and HazMat detection.

    Click here for more information and specifications.

    RAE Systems ppbRAE 3000 handheld VOC detector available at JM Test Systems

    ppbRAE 3000
    The ppbRAE 3000 is the most advanced handheld volatile organic compound (VOC) on the market. Its Photoionization Detector’s (PID) extended range of 1 ppb to 10,000 ppm makes it an ideal instrument for applications from HazMat/Homeland Security, industrial hygiene, to Indoor Air Quality and military applications.

    Click here for more information and specifications.

    RAE Systems MiniRAE Lite handheld VOC monitor available at JM Test Systems

    MiniRAE Lite
    The MiniRAE Lite is the most reliable hand-held volatile organic compound (VOC) monitor on the market. Its photoionization detector’s (PID) range of 0 to 5,000 ppm makes it an ideal instrument for applications ranging from environmental to construction.

    Click here for more information.

    JM Test RAE Systems AutoRAE Lite for QRAE IIAutoRAE Lite for QRAE II
    The AutoRAE Lite is a high-speed and low-operation-cost bump test and calibration station with data storage in Excel format. The AutoRAE Lite provides the lowest cost of ownership, and direct functional bump test indication. In addition, the AutoRAE Lite operates on a low-pressure system with a built-in pump.

    Click here for more information.

    JM Test AutoRAE Lite for ToxiRAE 3AutoRAE Lite for ToxiRAE 3
    The AutoRAE Lite is a high-speed and low-operation-cost bump test and calibration station with data storage in Excel format. The AutoRAE Lite provides the lowest cost of ownership, and direct functional bump test indication of more than 700 monitors, all on one set of batteries.
    In addition, the AutoRAE Lite operates on a low-pressure system with a built-in pump.

    Click here for more information.

    COMPOUND SPECIFIC

    RAE Systems UltraRAE 3000 compound-specific monitor available at JM Test Systems

    UltraRAE 3000 Benzene Detector
    The UltraRAE 3000 is the most advanced Compound-Specific Monitor on the market. Its Photoionization Detector’s (PID) extended range of 0.05 to 10,000 ppm in VOC mode and 50 ppb to 200 ppm in benzene-specific mode makes it an ideal instrument for applications from entry pre-screening during refinery and plant maintenance to hazardous material response, marine spill response and refinery down-stream monitoring.

    Click here for more information.

    For detailed technical specifications, click here.

    Click here to read about a benzene monitoring study performed in Waupaca, Wisconsin

    Click here to view RAE Systems’ Technical Note TN-127 "Benzene-Specific Measurements in Petroleum Hydrocarbons Using the RAE Systems UltraRAE"

    FIXED DETECTION

    Rae Transmitters

    RAE Systems RAEGuard PID VOC monitor available at JM Test SystemsRAEGuard PID
    The RAEGuard PID is a permanently mounted (fixed) volatile organic compound (VOC) monitor using a Photoionization Detector (PID) transmitter that operates from a 9 to 36 VDC power source and provides an analog (4-20 mA) signal output in three full scale ranges* of 20 ppm, 100 ppm, or 1,000 ppm isobutylene equivalent. Housed in an explosion-proof enclosure, the RAEGuard PID is equipped with a local digital display of the gas concentration and functional keys for performing calibration.    * Ranges are not selectable, and must be specified at the time of order.

    Click here for more information and specifications.

    RAE Systems RAEGuard EC sensor/transmitter available at JM Test Systems

    RAEGuard EC
    The RAEGuard EC is a permanently mounted (fixed) toxic gas or oxygen sensor/transmitter that operates from a 9 to 36 VDC power source and provides an analog (4 to 20mA) and digital (RS-485) signal output. Housed in an explosion-proof enclosure, the RAEGuard EC is equipped with a local digital display of the gas concentration and function keys for performing calibration. The RAEGuard EC is operated with a standard 4 to 20mA/RS-485 controller or as a stand-alone sensor module.

    Click here for more information.

    RAE Systems RAEGuard S Gas Detector available at JM Test Systems


    RAEGuard S

    The RAEGuard S is a permanently installed gas detector for hydrocarbon combustible gases, carbon dioxide and a wide range of toxic gases. It is a flexible detector which provides both an analog (4-20mA) and digital (RS-485, ModBus RTU) output signal. The RAEGuard S uses a smart sensor which can be off-line pre-calibrated. An explosion-proof stainless steel enclosure and magnetic key non-intrusive operation make the RAEGuard S ideal for use in hazardous environments. The RAEGuard S is equipped with a local digital display and LEDs for viewing of gas concentration and alarm conditions.

    Click here for more information.

    AREA DETECTION – WIRELESS

    Rae Single-gas

    RAE Systems MeshGuard battery-powered toxic gas detector available at JM Test Systems

    MeshGuard
    MeshGuard is the leading gas detection system that is rapidly deployable in numerous industrial and remote monitoring applications. MeshGuard not only saves lives, but tens of thousands of dollars in regulation compliance and information processing.

    MeshGuard combines the most advanced gas detection technology for industrial safety applications with the latest in connected data systems. Because the system includes powerful wireless sensors that can be deployed rapidly in any environment, MeshGuard eliminates the need for lengthy and costly installation projects. By detecting and recording a wide range of deadly gases and quickly relaying the data to an easy-to-understand central system, safety personnel have up-to-date information from throughout the network of sensors at a finger’s touch.

    Click here for more information and specifications.

    RAE Systems RAELink3 available at JM Test Systems

    RAELink3
    RAELink3 modem allows integration of many RAE Systems gas and radiation monitors, and select third-party devices into an AreaRAE wireless detection system. Monitors linked with a RAELink3 modem can communicate sensor data and GPS coordinates to a command center’s PC running ProRAE Remote Software up to 2 miles away. Bluetooth connectivity simplifies use with handheld monitors, while a user-friendly display and interface simplify configuration and status checking of the RAELink3.

    TN-114 – Click here to read Technical Notes Bulletin:
    RAE Systems Sensor Specifications and Cross-Sensitivities

    AP-211 – Click here to read Application Note:
    PIDs for Continuous
    Monitoring of VOCs

    TN-102 – Click here to read Technical Notes Bulletin:
    RAE Systems Photoionization Detector

    TN-123 – Click here to read Technical Notes Bulletin:
    Special Diagnostic Modes For RAE Systems Instruments

    Click here for a complete RAE Systems Product Selection Guide

    For more information regarding Rae Systems gas detection products offered at JM Test Systems, please contact us at 800-353-3411 or email us at [email protected].