Product Overview: Class 2, 3, or 4 Salisbury Electriflex Rubber Gloves
.table-striped th {background-color: #e4e4e4;padding: 10px 20px;}
.table-striped td {padding:10px 20px;}
h5 {font-weight:700;}
Salisbury Electriflex Gloves Technical Data
ASTM D120-09 EN60903:2003
Standard Specification for Rubber Insulating Gloves
Salisbury Electriflex Gloves are formulated for the ultimate in comfort and control. Thanks to the latest innovation in rubber insulating glove technology, Electriflex™ Gloves provide greater flexibility, dexterity and comfort. So, linemen can get into their work zones and take on tasks with less stress and strain. Flex technology isn’t just about enhancing your productivity. It’s also about making sure you return home safely today and continue to lead an active, comfortable life doing the things you enjoy tomorrow.
ELECTRICAL SPECIFICATIONS
| Class | AC Proof Test
Voltage, rms, V |
DC Proof Test
Voltage, avg, V |
Maximum Use
Voltage AC, rms, V |
Maximum Use
Voltage DC, avg, V |
|---|---|---|---|---|
| 2 | 20000 | 50000 | 17000 | 25500 |
| 3 | 30000 | 60000 | 26500 | 39750 |
| 4 | 40000 | 70000 | 36000 | 54000 |
ELECTRIFLEX MATERIAL SPECIFICATIONS
| Material | Type 1 Natural Rubber | Not Resistant to Ozone | 8.0 lbs. |
| Tensile strength, min | 2,500 psi (17.2 MPa) | Aluminum Captive Eye Carabiners | 5.9 lbs. |
| Tensile stress at 200%, max | 300 psi (2.1 MPa) | Steel Locking Snap Hook | 4.2 lbs. |
| Ultimate elongation, min | 600% | Steel Locking Rebar Hook | 5.1 lbs. |
| Tension set, max at 400% | 25% | Aluminum Locking Snap Hook | 3.9 lbs. |
| Tear resistance, min | 120 lbf/in (21 kN/m) | Aluminum Locking Rebar Hook | 4.7 lbs. |
| Puncture resistance, min | 100 lbf/in (18 kN/m) | Aluminum Captive Eye Carabiner | 3.7 lbs. |
| Hardness, shore A max | 47 | Steel Locking Snap Hooks | 7.3 lbs. |
| Accelerated aging | 70+/.2 °C (158 +/- 3.6 °F ), Circulating air, 7 days.
Tensile strength and elongation of the specimen shall not be less than 80% of the original |
||
RFID SPECIFICATIONS
| Supported Standards | Meets EPCglobal™ Gen2 (V 1.2.0); ISO/IEC 18000-6C:2004 |
| Operating Frequency | 860-960 MHz |
| Read Range | At least 3 ft. |
| Factory Programmed | 64-bit Unique Tag ID Unalterable |
| User Data | 512-bits |
| Data Retention | 10 Years (Typical) |
PHYSICAL SPECIFICATIONS
| Class | Thickness |
|---|---|
| 2 | 0.040‹ 0.090 in. (1.02‹2.29 mm) |
| 3 | 0.060‹ 0.115 in. (1.52‹2.92 mm) |
| 4 | 0.080‹ 0.140 in. (2.03‹3.56 mm) |
ORDERING INFORMATION
Cuff Style: Default=Straight Cuff, BC=Bell Cuff, C=Contour Cuff (available only in 18″ length)
Color: B=Black, YB=Yellow inner, black outer, RB= Red inner, black outer
Sizes: *BC available in sizes 9 through 12 including half sizes only – Size 11.5 is not available
| Class | Length | Cuff Style | Color | Size | RFID |
|---|---|---|---|---|---|
| NG 2 | 14, 16 or 18 | BC* or C | B, YB, or RB | 7, 8, 8H, 9, 9H, 10, 10H, 11, 12 | /RF |
| NG 3 | 14, 16 or 18 | BC* or C | B, YB, or RB | 8, 8H, 9, 9H, 10, 10H, 11, 12 | /RF |
| NG 4 | 16 or 18 | BC* or C | B, YB, or RB | 9, 9H, 10, 10H, 11, 12 | /RF |
PRODUCT MARKETING
| Patch attached to the cuff of each glove at the back of the hand* | Includes Salisbury, ASTM D120 Compliance, Size, Max Use Voltage, Class, Type, Color coded based on class |
| Serial Number marked on each glove near cuff on thumb side | Provides product traceability |
| Electrical Test Date Mark | Available upon customer request |
*RFID patch attached to the cuff of each glove at the front of the hand with red colored label without printing.
Reviews
There are no reviews yet.