Product Overview: PIE 531- Discontinued
PIE 531 – This product has been discontinued see PIE 134 for replacement
Features:
- Source and read current in the process loop and simulates, power and measure 2-wire transmitters
- Pocket-size
- EZ-Check™ switch can quickly switch between a set value, 4mA, and 20mA outputs
- In read mode, the EZ-Check™ switch recalls minimum and maximum readings
- Clear minimum and maximum memory values with a press of the EZ-Dial™ knob
- Two speeds for dialing in ranges, when you press down on the EZ-Dial™ it will select a faster dialing speed
Specs:
- True +/- 0.05% of reading accuracy
- Source and read 0.00 – 24.00mA
- Simulate 2-wire transmitters 0.00 – 24.00mA
- Power 2-wire transmitters and read 0.00 – 24.00mA
- Display current in mA or -25.00 – 125.00% of 4-20mA
- Full 4 digit display
- Drive 1200Ω
- User selectable 250Ω resistor in series with the output for compatibility with HART® protocol enabled devices
- EZ-Dial™ knob easily adjust output by 0.01mA (0.01%) or 0.10mA (1.00%).
- EZ-Check™ switch
- User settable EZ-Check™ for 0% and 100% span adjustments
- Uses 2 AA alkaline batteries.
- Superior battery life of 45 hours under typical continuous usage
- Easy access to battery compartment
- Lightweight, Rugged and Reliable
- Small, tough and protected to 60V
- Test Data available
- NIST Traceable Calibration Certificate included FREE
Reviews
There are no reviews yet.