Product Overview: Megger MIT210 250V/500V/1000V Insulation and Continuity Tester
Megger MIT210
• Insulation testing to 1000 MΩ
• Continuity testing at 200 mA down to 0.01 Ω
• Live circuit warning (voltage display) and test inhibit
• Digital/Analogue display
• Alkaline or rechargeable batteries
• –10ºC to +55ºC operating temperature
• CATIII 600 V
• Conforms to EN61557-1
The Megger MIT210 will find applications in electrical contracting, both on domestic and industrial systems, as well as site maintenance and service departments.
The MIT200 series of insulation and continuity testers are
ideal for testing transformers, motors, generators,
switchgear, panel building, domestic appliances, power tools etc., as well as fixed electrical wiring systems.
Their small size and light weight make them ideal for those engineers that need to carry them for extended periods.
Continuity Testing
Automatic continuity testing is performed at 200 mA to ensure compliance with international requirements. The convenient auto-start feature means there is no need to press the test button to begin the test -both hands can be used to hold the test lead probes.
The MIT210 will measure up to 100 ohms on continuity, with 0-10 ohms using 200 mA so meeting international electrical testing requirements. Lead null is possible up to 9.99 ohms of test lead resistance, providing the ability to null fused, extended or standard test leads.
Continuity Buzzer
A buzzer provides a means of rapid cable testing and circuit continuity identification, with voltage protection should you accidentally touch a live circuit. The buzzer operates at a 2 ohm threshold.
Insulation Testing
The MIT210 supports insulation testing at 1000 V. Auto discharge ensures all circuits under test are safely discharged after testing. The 1000 V insulation test range furthermore provides a high voltage warning prior to test voltage being applied.
Safety
The MIT210 Tester is designed with safety as its primary objective. There are in-built safety checks to warn of inadvertent connection to a hazardous live supply on all ranges. The MIT210 either meets or exceeds the requirements of safety directive IEC 61010 and EN 61557 for insulation and continuity testing.
Default Voltmeter
A built-in voltmeter is automatically activated and displays the system voltage when the MIT210 is connected to a circuit with an AC or DC voltage greater than 25 V.
Test Inhibit
Circuits in excess of 25 V will generate a voltage warning as above. The instrument will inhibit testing on circuits over 50 V on both continuity and insulation test ranges, protecting the operator and the instrument from injury or damage.
600 V CAT III
The MIT210 has been designed for use on applications up to 600 V CAT III.
Reviews
There are no reviews yet.