High Voltage PFT-103CM 10k Vac @ 3kVA Portable AC Hipot Tester

Product Overview: High Voltage PFT-103CM 10k Vac @ 3kVA Portable AC Hipot Tester

High Voltage PFT-103CM 10k Vac @ 3kVA Portable AC Hipot Tester

The PFT Series of portable AC hipot test sets are ideal for a variety of field and repair shop testing applications. These inexpensive, compact and light weight units are rugged and reliable. Our 3 kVA models feature capacitive load compensation enabling full load testing with a power draw of 1.5 kVA while operating from a conventional line input.* Models below 100 kVac are single piece units with a shielded cable output for fast and easy test setup. The PFT-103CM, PFT-303CM, PFT-503CM, and PFT-1003CM are compensated enabling testing of 3 kVA loads with a power draw of 1.5 kVA and operate from a conventional electrical source*. In addition, these units include a dual range kilovolt meter, triple range output current meter and a guard/ground return mode enabling the operator to measure the total current to ground or only the current flowing through the sample under test.

High Voltage PFT-103CM Features:

• Ideal for testing many types of substation apparatus, motors/generators, isophase bus, and other loads requiring an AC withstand test
• Capacitive load compensation enabling full load testing with a power draw of 3 kVA while operating from a conventional line input
• Dual range kilovoltmeter and triple range ouput current meter
• Continuously adjustable output voltage control
• External safety interlock
• Zero start safety interlock
• Self resetting over current protection
• Guard/ground return mode
• HV on/off and main power pushbuttons
• Ruggedized meters with glass windows that eliminate static buildup
• Portable
• Lightweight
• Rugged
• Reliable

High Voltage PFT-103CM Specs:

• Input:
  • 120 V, 60 Hz, 15 amps
  • 230 V, 50/60 Hz, 8 amps  (F)
• HV output: 0-10 kVac, 1 kVA resistive load: 100 mA,   3kVA capacitive load: up to 300 mA @ 10 kV with tuned load, output current is reduced at lower voltages
• Duty:
  • 3 kVA: 1 hour ON, 1 hour OFF
  • 1.5 kVA continuous
• Distortion: <5%
• Meter accuracy: 2% F.S.
• Kilovoltmeter: 3.5”, Scaled 0-5/10  kVac
• Current meter: 3.5”, Scaled 0-3.0 mAac, with range multipliers of x1, x10, x100, Guard/Ground Load Return
• Case dimensions: 21” w x 11.25” d x 15.25” h
• Weight: 62 lbs.
• Output termination: 20 ft. shielded EPR output cable with alligator clamp.  EPR cable stays flexible in cold weather
• * Options: Upgrade to include a fault burning circuit

See more AC Hipots here.