TEST EQUIPMENT
MADE EASY ™

Fluke 190 Scopemeter Series II

As the first two and four-channel portable scopes safety rated CAT III 1000V / CAT IV 600V, the Fluke ScopeMeter 190 Series II combines an unprecedented level of performance, ruggedness, and portability. You can choose from 60MHz, 100MHz, 200MHz or 500MHz bandwidth models, with real-time sampling rates up to 5 GS/s and 200 ps resolution to capture noise and other disturbances. All models feature deep memory—up to 10,000 samples per channel— so you can examine very small parts of the waveform in detail. And all models are IP-51 rated to withstand dust, drips, humidity, and wide temperature variations.

Clear
QTY:
 
Manufacturer

MHz & Channels

60 MHz, 2 channels, 100 MHz, 2 channels, 100 MHz, 4 channels, 200 MHz, 2 channels, 200 MHz, 4 channels, 500 MHz, 2 channels, 500 MHz, 4 channels

SKU: Fluke 190 Scopemeter Categories: ,

RENT THIS ITEM

Daily, Weekly, and Monthly rates are available on select items.

CALIBRATION SERVICES

Calibration, inspection, cleaning, and/or repair may be available for this item.

Product Overview: Fluke 190 Scopemeter Series II

The Fluke ScopeMeter 190 Series II is the first four- and two-channel scopes built for CAT IV industrial environments

  • Extend your arsenal of troubleshooting capabilities by visually inspecting signals amplitude, time, shape and disturbance or distortion characteristics.
  • The Fluke 190 series combines the power of a high performance oscilloscope, multimeter and paperless recorder in an easy to use test tool you will come to rely on in the field.

The 190 Series II is the one test tool you will reach for to tackle just about any troubleshooting task. They include a multimeter, TrendPlot™ and ScopeRecord™ roll paperless recorder modes and hands free operation with Connect-and-View™ triggering, and much more:

  • Two or four electrically isolated inputs
  • CAT III 1000V / CAT IV 600V safety rated
  • Choose from 60 MHz, 100MHz, 200MHz or 500MHz bandwidth models
  • Fast sampling rate, up to 5GS/s with up to 200 ps resolution (Depending on model and channels used)
  • Deep memory: 10,000 samples per channel waveform capture so you can zoom in on the details
  • Dedicated 5000 Count digital multimeter in 2 Channel models
  • Quad meter measurements via scope BNC inputs in 4 channel models
  • Connect-and-View continuous auto-trigger, single shot, pulse width, and video triggering
  • ScopeRecord roll mode, capture waveform sample data for up to 48 hours
  • TrendPlot, trend measurement readings for up to 22 days
  • Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
  • IP-51 rated for dust and drip proof to withstand harsh environments
  • Isolated USB ports for memory devices and PC connectivity
  • Li-Ion battery for extended operating timespan
    • 190-X04, 4 Channel models up to 7 hour (BP291 included standard)
    • 190-XX2, 2 Channel models up to 4 hours (BP290 included standard) or up to 8 hour with optional BP291
    • Charge spare battery using optional external battery charger EBC290
  • Easy-access battery door to make it easy to swap batteries
  • A handy slot to tether and lock down the oscilloscope while unattended using a standard Kensington® lock

 

Fluke ScopeMeter 190 Series Model Names

Model NameDescription
Fluke-190-504/SColor ScopeMeter, 500 MHz, 4 channels plus DMM/Ext.input, with SCC-290 Kit
Fluke-190-504Color ScopeMeter, 500 MHz, 4 channels plus DMM/Ext.input
Fluke-190-502Color ScopeMeter, 500 MHz, 2 channels plus DMM/Ext.input
Fluke-190-502/SColor ScopeMeter, 500 MHz, 2 channels plus DMM/Ext.input, with SCC-290 Kit
Fluke-190-062Color ScopeMeter, 60 MHz, 2 channels plus DMM/Ext.input
Fluke-190-062/SColor ScopeMeter, 60 MHz, 2 channels plus DMM/Ext.input, with SCC-290 Kit
Fluke-190-102Color ScopeMeter, 100 MHz, 2 channels plus DMM/Ext.input
Fluke-190-102/SColor ScopeMeter, 100 MHz, 2 channels plus DMM/Ext.input with SCC-290 Kit
Fluke-190-104Color ScopeMeter, 100 MHz, 4 channels plus DMM/Ext.input
Fluke-190-104/SColor ScopeMeter, 100 MHz, 4 channels plus DMM/Ext.input with SCC-290 Kit
Fluke-190-202Color ScopeMeter, 200 MHz, 2 channels plus DMM/Ext.input
Fluke-190-202/SColor ScopeMeter, 200 MHz, 2 channels plus DMM/Ext.input, with SCC-290 Kit
Fluke-190-204Color ScopeMeter, 200 MHz, 4 channels plus DMM/Ext.input
Fluke-190-204/SColor ScopeMeter, 200 MHz, 4 channels plus DMM/Ext.input, with SCC-290 Kit

 

Gain Four Times the Diagnostic Power Plus CAT IV Safety Rating

The new Fluke ScopeMeter 190 Series II portable scopes are double-insulated two and four-channel floating oscilloscopes safety rated for measurements in CAT III 1000V/CAT IV 600V environments.

oscilloscope

Three-dimensional testing for industrial systems »

Inspect input signals, output feedback loops or safety interlocks simultaneously to find a range of problems including:

  • Circuit voltage/current overloading
  • Signal timing measurements and synchronization issues
  • Attenuation/input impedance mismatch
  • Signal fluctuation/drift
oscilloscope

Three-phase testing for diagnosing VSD, power inverters, and converters »

  • Test for harmonics, transients and loads at the three-phase power input
  • Troubleshoot dc to ac converters for faulty IGBT gates or filter circuits
  • Test PWM output for reflections and transients or voltage unbalance

Safely measure from mV to kV

Standard probes that cover a wide application range from mV to kV prepare you for anything from micro-electronics to heavy duty medium voltage electrical applications. Independent isolated inputs eliminate the risk of accidental ground short circuits by allowing you to make measurements in mixed circuits with separate ground references.

Take on the Harshest Conditions with the only IP-51-rated Scope on the Market

Rugged and shock-proof, all ScopeMeter portable oscilloscopes are built for harsh environments. Their sealed cases protect them from dust, water vapor, drips, humidity and airborne pollutants, ensuring reliable accurate performance every time you need them.

Meter mode

Built in multimeter to quickly and conveniently perform precise measurements.

Built-in digital multimeter 190 Series II 2 channel models with isolated dual input scope and dedicated digital multimeter. Conveniently switch from waveform analysis to precise multimeter measurements using the built in 5000 count digital multimeter. Measurement functions include Vdc, Vac, Vac+dc, resistance, continuity and diode test. Measure current and temperature using suitable shunt, probe or adapter with wide range of scaling factors. The Fluke-190-X04, 4 channel models incorporate quad meter measurements via the 4 channel scope BNC inputs.

oscilloscope

Work a Full Shift on a Single Charge

New high-performance batteries take advantage of Li-ion technology to keep you going strong for up to seven hours in 4 channel models or up to four hours in 2 channel models. And with the easy-access battery door you can make battery swaps fast.

scopemeter usb

Capture and Share Waveforms Easily with New USB connectivity

Two USB ports, electrically isolated from measurement input circuits offer you easy USB connectivity to a PC or USB memory devices. Store unlimited waveform, screen captures or instrument steups to a USB memory device. Connect to a PC USB interface to transfer and archive critical measurement data using FlukeView software for windows.

oscilloscope

See a Stable Display Instantly with Connect-and-View™ Triggering

Connect-and-View™ automatically sets up correct triggering by recognizing signal patterns. Without touching a button, you get a stable, reliable, and repeatable display of virtually any signal including motor drive and control signals. Expedites measuring several test-points in rapid succession.

oscilloscope

Record Up to 48 Hours of High-Resolution Waveforms with ScopeRecord™

ScopeRecord memory stores up to 30,000 data points per channel, capturing intermittents and fast glitches. (Two sets of multiple-channel recordings can be stored for later analysis.)

  • Stores events like motion profiles, UPS, power supply, and motor start-ups
  • With the Stop-on-Trigger mode, the ScopeMeter 190 series II automatically recognizes a power failure and stores the waveform data preceding it
  • With the waveform zoom (up to 100x) you can look at the smallest details, like individual power cycles
oscilloscope

Record up to 22 days with TrendPlot™ paperless recorder to find intermittent faults

Intermittent faults can be caused by bad connections, dust, dirt, corrosion, or simply broken wiring or connectors. Line outages, sags, or starting and stopping a motor can also cause a machine to stop. The TrendPlot function in the Fluke ScopeMeter test tool helps find those faults by:

  • Plotting minimum and maximum peak values and average over time up to 22 days
  • Plotting any combination of voltages, amps, temperature, frequency and phase for all four inputs, all with time and date stamp to pinpoint faults

 

Rent the Fluke 190 Scopemeter Series II

Request Rental Quote Above

JM Test Rental options can help you save capital, get the latest technology, and expand your capabilities. Daily, Weekly and Monthly rates are available on select items.

Fluke 190 Scopemeter Series II Calibration

Request a Calibration Quote

Calibration, inspection, cleaning, and/or repair may be available for the Fluke 190 Scopemeter Series II. Click to inquire about our calibration or other services.