TEST EQUIPMENT
MADE EASY ™

ADT221A Multifunction Temperature Calibrator

ADT 221A Multifunction Temperature Calibrator with Documenting Capability

View Quote List
QTY:
 
Manufacturer

SKU: ADT221A Category:

Product Overview: ADT221A Multifunction Temperature Calibrator

ADT221A Multifunction Temperature Calibrator

  • Sourcing, simulating and measuring, temperature and electrical signals
  • Smartphone-like menu and interface make the operation simpler and easier
  • The internal cold junction compensation sensor can be re-calibrated  at ice point by users
  • Ultra-compact, 3.9” x 7.6” x 2.0”, and 1.6 lb (0.7 kg)

A highly integrated Multifunction Temperature Calibrator featuring several patented technologies, the 221A is an ultra-compact, rugged, and easy to use hand-held device for sourcing, simulating and measuring temperature, and electrical signals. Its smartphone-like menu and interface make the operation simpler and easier. The 221A is ideal for calibrating, maintaining, and troubleshooting process instrumentations. Automation and documentation capabilities make the 221A a turnkey solution.

ADT221A Multifunction Temperature Calibrator Features

• Sourcing, simulating and measuring temperature and electrical signals
  Sources and measures mV, mA, ohms, RTDs, thermocouples, frequency, and pulses
  Simulates and measures 13 thermocouples and 11 RTDs to calibrate transmitters
  24V loop power supply
  Simultaneous dual reading capability
  Automatic switch test
  Supports square root transmitter
  Pulse frequency output for the calibration of flow totalizer
• Easy to use
  Smartphone-like menu and interface make the operation simpler and easier
  Ultra-compact, size 3.9” x 7.6” x 2.0” (100mm x 192mm x 52mm), and weight 1.6 lb (0.7 kg)
  One hand operation
• Calibrated cold junction compensation (Patented)
  Cold junction equivalent block in the calibrator
  A calibrated PRT element with flexible leads is installed in the equivalent block for thermocouple cold junction compensation
  This PRT element can be pulled out from the calibrator and re-calibrated and corrected at ice point by users
• Built-in temperature readout
  CVD coefficients of a calibrated PRT can be input into the calibrator for accurate temperature measurement.
• Multi lingual interface
  English, German, French, Italian, Spanish, Portuguese, Simplified Chinese
(Traditional Chinese, Japanese and Russian are available per request)
• Documenting and automated procedure capability
  Manage the information of the device under test.
  Set up automated calibration procedures, and ADT 221A performs the test, calculates the errors, displays and/or stores the results in the memory, and highlights the out-of-tolerance points.
  As-found and As-left functions allow recording and documenting results for quality control.
  Download tasks and upload the results.
  Snapshots allow you to capture and save work.
• Build-in unit conversion tool
  Build-in converters for pressure units, temperature units, temperature vs. resistance (RTDs), and temperature vs millivolt (thermocouples)
• Display
  3.5 inch TFT color screen
• Rugged
  Rugged design for harsh environments.
  Passed a 1-meter drop test.
  Three year warranty for the ADT 221A, and one year for the battery pack
• Misuse protection
  Up to 30V voltage on any two sockets and up to 1A current on current sockets will not damage the calibrator. The calibrator will return to normal condition as soon as the voltage or current is removed.
• Rechargeable battery
  Rechargeable Li-ion battery for 15 hours uninterrupted use.
  Battery life will be reduced when 24V is applied.

  The rechargeable battery is replaceable.

• NIST Traceable Calibration with data

• Warranty
 3 years
Applications
The ADT221A multifunction temperature calibrator is a process tool for measuring, sourcing and simulating mA, mV, V, RTDs, thermocouples, ohms, frequency, and pulses, captures switch values and provides 24 V loop power.
• Electrical
  Resistance measurement / simulation
  Voltage measurement / generation
  Current measurement /generation
  Frequency measurement / generation
  Pulse counting/generation
  24 VDC loop supply
  Switch sensing
• Temperature
  RTD measurement /simulation
  TC measurement /simulation
ADT221A Multifunction Temperature Calibrator Specifications
• Electrical Specifications
Measurement Accuracy
Range
Resolution
Accuracy 
Voltage DC
±75.0000 mV
±30.0000 V
1µV
0.1mV
0.01%RD+0.005%FS
0.01%RD+0.005%FS
Current DC
±30.0000 V
0.1µA
0.01%RD+0.005%FS
Resistance
Two-wire
0 to 400.000 Ω
1mΩ
0.02%RD+0.005%FS
Three-wire
0 to 400.000 Ω
1mΩ
0.02%RD+0.005%FS
Four-wire
0 to 400.000 Ω
1mΩ
0.01%RD+0.005%FS
Two-wire
0 to 400.000 Ω
10mΩ
0.02%RD+0.005%FS
Three-wire
0 to 400.000 Ω
10mΩ
0.02%RD+0.005%FS
Four-wire
0 to 400.000 Ω
10mΩ
0.01%RD+0.005%FS
Frequency
1 to 50000.0 Hz
0.1Hz
0.005%RD+0.002%FS
Pulse
0 to 999999
1
N/A
Limit Switch
If the switch has detective voltage, its range is +3V to +24V
Source Accuracy
Voltage DC
-10.000 to 75.000mV 0 to 12.0000 V
1μV
0.1mV
0.02%RD+0.005%FS
0.02%RD+0.005%FS
Current DC
0 to 22.000 mA
1µA
0.02%RD+0.005%FS
Resistance
1 to 400.00 Ω
1 to 4000.0 Ω
10mΩ
100mΩ
0.02%RD+0.005%FS
0.03%RD+0.01%FS
Frequency
0 to 50000.0 Hz
0.1Hz
0.005%RD+0.002%FS
Pulse
0 to 999999
1
N/A
DC24V
N/A
N/A
0.5V

•  General Specifications

Environmental Specifications
Operating Temperature
-10°C to 50°C
Storage Temperature
-20°C to 60°C
Humidity
<90%, non-condensing
Safety Specifications
European Compliance
CE Mark
Mechanical Specifications
Display
3.5 inch TFT color screen
Electrical Connection
φ4mm sockets and flat mini-jack thermocouple socket
RS232 Interface
standard RS232-DB9 socket
Size
3.9” x 7.6” x 2.0” (100mm x 192mm x 52mm)
Weight
1.6 lb (0.7 kg)
Power Supply
Polymer Li-ion rechargeable battery, or 10V DC adaptor
Battery
Rechargeable Li-ion battery (included)
Battery Life
15 hours uninterrupted use
Battery life will be reduced when 24V is applied
Battery Charge
110V/220V external power adapter (included)

• Temperature Specifications

Thermocouple Measurement and Source accuracy
Measure
and Simulate
Standard
Temperature Range (°C)
Accuracy (°C)
Measure
Source
S
IEC 584
-50 to 1768
-50 to400
1.0
1.1
400 to 1000
0.6
0.6
1000 to1768
0.7
0.8
R
IEC 584
-50 to 1768
-50 to 200
1.4
1.4
200 to 500
0.6
0.6
500 to 1768
0.6
0.7
B
IEC 584
0 to 1820
50 to 450
3.8
3.8
450 to 800
0.9
0.9
800 to 1820
0.6
0.7
K
IEC 584
-270 to 1372
-250 to -200
1.0
1.1
-200 to -100
0.4
0.5
-100 to 600
0.3
0.3
600 to 1372
0.4
0.5
N
 IEC 584
-270 to 1300
-250 to -200
1.5
1.6
-200 to -100
0.5
0.6
-100 to 1300
0.4
0.5
E
IEC 584
-270 to 1000
-250 to -200
0.6
0.7
-200 to -100
0.3
0.3
-100 to 0
0.2
0.2
0 to 700
0.2
0.3
700 to 1000
0.2
0.4
J
IEC 584
-270 to 1200
-210 to -100
0.3
0.3
-100 to 1200
0.3
0.4
T
IEC 584
-270 to 400
-250 to -200
0.8
0.9
-200 to 0
0.4
0.4
0 to 400
0.2
0.2
C
ASTM E988
0 to 2315
0 to 1000
0.5
0.5
1000 to 1800
0.7
0.9
1800 to 2315
1.0
1.4
D
ASTM E988
0 to 2320
0 to 100
0.5
0.5
100 to 1100
0.4
0.5
1100 to 2000
0.6
0.9
2000 to 2320
0.9
1.3
G
ASTM E1751
0 to 2315
0 to 200
2.4
2.4
200 to 400
0.5
0.5
400 to 1400
0.4
0.5
1400 to 2315
0.7
1.0
L
DIN43710
-200 to 900
-200 to -100
0.2
0.3
-100 to 400
0.2
0.2
400 to 900
0.2
0.3
U
DIN43710
-200 to 600
-200 to 0
0.4
0.4
0 to 600
0.2
0.3
RTD Measurement and Source accuracy
Measure
and Simulate
Standard
Temperature Range (°C)
Accuracy (°C)
Measure (2W/3W)
Measure (4W)
Source
Pt10(385)
IEC 751
-200 to 850
-100 to 200
0.65
0.60
0.65
200 to 600
0.82
0.72
0.82
600 to 850
0.96
0.82
0.96
PT100
(385)
IEC 751
-200 to 850
-100 to 200
0.15
0.1
0.15
200 to 600
0.26
0.16
0.26
600 to 850
0.34
0.20
0.34
Pt100
(3916)
IEC 751
-200 to 850
-100 to 200
0.15
0.1
0.15
200 to 600
0.26
0.16
0.26
600 to 850
0.33
0.20
0.33
Pt200(385)
IEC 751
-200 to 850
-100 to 200
0.37
0.32
0.69
200 to 600
0.51
0.41
0.92
600 to 850
0.61
0.48
1.08
Pt500(385)
IEC 751
-200 to 850
-100 to 200
0.20
0.16
0.36
200 to 600
0.32
0.22
0.54
600 to 850
0.40
0.27
0.67
Pt1

See more Temperature Calibrators here.

Reviews

There are no reviews yet.

Be the first to review “ADT221A Multifunction Temperature Calibrator”

Your email address will not be published. Required fields are marked *