Product Overview: SMC Raptor Slave high current test set
SMC Raptor Slave
The slave Raptor is visually identical to the master unit but lacks the amplifier, the handheld controller and the auxiliary input/output panels. Its only mission is to push an additional 5 kVA power from the mains input to the high current pass-through secondary. Up to three slaves can be added for up to 15,000 A with a 18-kVA total injection power. The master unit detects the presence of slaves using infrared communications, so no additional control or power interconnections are required. The user only needs to pass the current conductor across the entire assembly and use it as if it was a single device. As an added benefit of the pass-through secondary technique, the user can easily multiply the compliance voltage by making more than one turn with the current conductor around the entire system. No need to disconnect / reconnect to separate output taps.
The SMC Raptor Slave features two toroidal windings that are activated individually by the master unit as the power demand grows. If two or more slaves are used, the master activates one toroidal in each unit first, then the second toroidal in all. This sophisticated injection control ensures seamless current flow and optimal workload distribution
Small adn lightweight:
35 kg (77Lbs)
440mm x 230mm x 550mm
(17” x 9” x 22”)
IRDA interface:
Infrared communications link to master Raptor.
High current output:
0 – 3,800 A (7.75 kVA) permanent
0 – 15,000 A (22 kVA) for 5 seconds
Automatic two-stage power switching from master unit
Signaling LEDs:
Power-on, injection, protection and communications
SMC raptors available for rent, lease, or rent to own.
Rent you SMC Raptor High Current Test Set from JM Test Systems today.
NOW OFFERING DAILY RENTAL RATES ON THIS ITEM! CALL TODAY!
Reviews
There are no reviews yet.