Product Overview: Salisbury ILP3S Leather Protector Gloves With Straight Cuff
Leather Protector Gloves should always be worn over insulating Rubber Gloves to provide the needed mechanical protection against cuts, abrasions and punctures.
Manufactured from top grain Cowhide
OAL length: 12”
Tough leather on plam side and orange vinyl on back
Comes in dual sizes 7/7.5 through 11/11.5 and 12
It is the responsibility of the purchaser to specify the overall length of the protector gloves.
For class 0 and 00 Rubber Gloves the minimum distance which shall be allowed between the top of the protector glove cuff and the top end of the bead of the rubber glove per ASTM F496 Specifications is 1/2 in.
For class 2 Rubber Gloves the minimum distance which shall be allowed between the top of the protector glove cuff and the top end of the bead of the rubber glove per ASTM F496 Specifications is 2 in.
WARNING: Do not use leather protectors alone for protection against electric shock. Serious injury or death will result. Always use proper insulating rubber gloves. Proper care of leather protectors is essential to user safety. Inspect the leather protectors when inspecting rubber gloves. Metal particles, imbedded wire, abrasive materials or any substance that could physically damage the rubber gloves must be removed from the protector before use.