Product Overview: Ralston SPOV Gas Sampling Hand Pump

Ralston SPOV Gas Sampling Hand Pump

The Problem: When taking a sample of gas and there is not enough pressure to fill a sample cylinder.

Solution: The new Ralston Instruments SP0V gas sampling pump

Ralston SPOV Gas Sampling Hand Pump

The new SP0V gas sampling pump can pull low pressure gas from a well and boost it to 125 psi. Setting up the pump involves connecting the inlet hose to the pipeline sample point, connecting the outlet hose to the sample cylinder and connecting a pressure gauge to the other outlet port. Then as the sample pump is stroked it boosts the gas pressure up and pumps it into the sample cylinder while the pressure gauge reads the cylinder pressure.

The sampling pump uses Ralston Quick-test connections, hoses and adapters which make setting it up fast and easy to connect and disconnect.

The pump is made from anodized aluminum and brass so none of the components will affect the sample being taken.

It comes with two hoses, adapters and a gauge connection for easy setup in the field.

Perform very precise low pressure calibration or differential pressure calibration using an attached gauge or calibrator (gauge and calibrator not included)

Light weight, compact pump generates up to 125 psi (8.6 bar) with ease
Large volume fine adjustment piston provides precise control, even at very low pressures
Modular design makes field maintenance quick and easy
Precisely vent pressure with soft seated bleed valve
Two outlet ports provide connections for both pressure reference and for device under test thus eliminating a tee
Low volume Quick-test hose, gauge adapter and process connection can be attached to pump without thread sealant or a wrench
Rugged, all metal construction reduces pressure changes due to temperature fluctuations
Made in U.S.A.

See more Pneumatic Hand Pumps here.