PIECAL 322-1 Evolution Line Thermocouple Calibrator

PieCal-322-1 Automated Thermocouple Calibrator J,K,T and E

View Quote List


Daily, Weekly, and Monthly rates are available on select items.

Product Overview: PIECAL 322-1 Evolution Line Thermocouple Calibrator

With the PIECAL 322-1 you can check and calibrate all your thermocouple instruments and measure thermocouple sensors.
Carry it without worry – it comes protected with a rubber boot and rugged, low profile switches. Easy to operate even in the dark areas of the plant with the backlit display.
• Calibrate directly in temperature (°C & °F)
Stop carrying around a millivolt source and thermocouple tables. The PIECAL 322 works with the four most common thermocouples you use including types J, K, T and E. Easily set any value quickly to within 0.1° with the adjustable digital potentiometer “DIAL” plus store any three temperatures for instant recall with the EZ-CHECK™ switch. Or calibrate from -13.000 to +80.000 mV.
• Fast calibration with automatic output stepping
Choose between 2, 3, 5, 11 steps and ramp to automatically increment the output in 100%, 50%, 25%, 10% or 5% of span. Select the step time to match your system from 5, 6, 7, 8, 9, 10, 15, 20, 25, 30 and 60 seconds.
• Compatible with ALL process instruments
No competitor’s calibrator is compatible with as many process instruments! Connect directly to the thermocouple inputs of transmitters, PLCs, DCS & multichannel recorders to verify their outputs or displays.
• Measure thermocouple sensors
Trouble shoot sensor connections and find broken wires or corroded connections. Connect your thermocouple and the PIECAL 322 measures the probe in degrees C or F.
• Calibration Lab Accurate & Stable
The internal cold junction thermistor is accurate to ±0.05°C and is traceable to NIST. The sensor is thermally bonded to an isothermal mass which includes brass blocks with screw terminals for connection of bare thermocouple wires along with a miniature thermocouple connector for fast connections. The circuitry uses an extremely stable voltage reference and low drift components which make the PIECAL 322 more accurate than most other handheld and benchtop thermocouple calibrators.
• Evolutionary design
PIECAL Calibrators are designed and built by members of the same team that designed and built the calibrators manufactured by Fluke* under the Altek* label. The PIECAL 322-1 improves upon other brands by including a rubber boot, tilt stand, backlit display with larger digits, rugged switches & a battery compartment for fast battery changes.

PIECAL 322-1 Automated Thermocouple Calibrator Evolution Line

Source and Read Four T/C Types plus mV
J, K, T & E: -13.000 to 80.000 mV
Calibrate with Confidence
Resolution to 0.1 °F & °C; Accurate to 0.2°
Faster Calibrations
Instantly select three outputs with EZ-CHECK switch
Easily find trip points with two speed EZ-DIAL knob & Automatic Stepping
Easily Change T/C Types & Scale
Double click to select T/C type & °F & °C
Easy-to-Read Display
Turn on the backlight to read in dark areas of the plant
Use in the Plant, Field or Shop
Includes Rubber Boot and mV Test Leads
Low profile switches resist accidental damage
Simple ‘No Tool’ Battery Changes
Four inexpensive ‘AA’ batteries
Optional Accessories
Wire & Mini T/C Plug: J, T, E, K (020-0202)
Advantages of the PIECAL 322 over the Altek 322
Automatic Stepping & Ramping
Larger Display with Backlight
Easy viewing in dark locations
More Resistant to Accidental Damage
Rubber Boot and Stronger Switches
Separate Battery Compartment
No more removing housing with screwdriver to replace batteries
Calibration seals remain intact
Easily Change Thermocouple Types
Reconfigure without resetting calibrator

See more temperature calibrators here.

Rent the PIECAL 322-1 Evolution Line Thermocouple Calibrator

Request Rental Quote Above

JM Test Rental options can help you save capital, get the latest technology, and expand your capabilities. Daily, Weekly and Monthly rates are available on select items.