PIE 820 Elite Multifunction Diagnostic Process Calibrator PIE 820 Elite

Multifunction Diagnostic Process Calibrator – 8 Function Calibrators in One

View Quote List



Daily, Weekly, and Monthly rates are available on select items.

Product Overview: PIE 820 Elite Multifunction Diagnostic Process Calibrator PIE 820 Elite



PIE 820-ELITE Multifunction Diagnostic Process Calibrator


Lighten up your toolbox

Compact calibrator replaces toolbox of single function devices

Milliamp • Voltage • Frequency • pH • Thermocouples • RTDs • Check Continuity • Pressure


Technician friendly operation

Intuitive EZ-DIAL Double Click Menu makes it easier to setup than other multifunction calibrators. Uses the same menus as the single function PIECAL Evolution Calibrators


Use it as a milliamp and voltage calibrator

Source 0.000 to 24.000 mA, 0.00 to 10.250 V dc, -20.00 to 99.999 mV and -500.00 to 999.99 mV Read to 24.000 mA, 60.00 V dc ±99.999 mV and and ±999.99 mV Simulate 2-Wire Transmitters
Power up transmitters & loops with the built-in 24 V power supply. Simplify HART hookups with built-in 250 Ohm resistor


Troubleshoot loop problems

Quickly diagnose ground fault and current leakage with patented loop diagnostic technology (US Patent 7,248,058)


Calibrate directly in temperature (°C & °F)

The PIECAL 820 works with the instruments you use. Types J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) and P (Platinel II) Pt 100 Ohm (3850, 3902, 3916, 3926) & 1000 Ohm (3850) Copper 10 & 50 Ohm, Nickel 100 and 120 Ohm


Checkout flow and vibration systems

Source & read frequency to 2000 CPM (Counts-Per-Minute), 999.00 Hz, 9999.9 Hz, 9.9999 kHz & to 20.000 kHz


Troubleshoot loop & wiring problems

‘Beep’ out connections with the built-in continuity checker


Simulate pH probes into transmitters & analyzers

Source from 0.000 to 14.000 pH @ 25°C (77°F) corresponding to +414.12 to -414.12 mV


Measure pressure with optional pressure modules

Three modules for 30 psi/2 bar gauge, 500 psi/35 bar gauge and 30 psi/2 bar absolute


Easy to read

Turn on the backlight & easily see the display in dark areas of the plant


Quickly set any three outputs plus automatic stepping & ramping

Easily set any value quickly with the adjustable ‘DIAL’ plus store any three output settings for instant recall with the EZ-CHECK™ switch. Choose between 2, 3, 5 & 11 steps to automatically increment the output in 100%, 50%, 25% or 10% of span. Select RAMP to smoothly increase and decrease the output between Zero and Span. Set step/ramp time to match your system from 5, 6, 7, 8, 10, 15, 20, 25, 30 and 60 seconds.


Measure temperature sensors, frequency pickups, loop currents, voltage levels & pressures

Check the values of your process sensors. Instantly recall MAX and MIN values to see process variability


Advantages of the PIE 820-ELITE over similar multifunction calibrators


Higher Accuracy – Cal Lab Accurate

Accurate to 0.006 mA, Pt 100 Ohm RTD to 0.2°C/0.4°F, Type K to 0.3°C/0.6°F, pH to 0.003 pH


Loop Diagnostics – Unique to PIE

Only multifunction calibrator that can power up a loop and tell you that there is moisture, corrosion or a ground fault causing current to leak to ground.


Simulates a pH probe

Calibrate pH tranmitters & analyzers before attaching probe to verify that each is working correctly.


More Thermocouple & RTD ranges with 0.1° resolution and better accuracy

Compatible with smart transmitters, multichannel recorders, PLCs and DCSs – GUARANTEED!


Smaller & lighter

Pocket sized and easier to carry


LED for optical pickups

LED flashes green in synch with frequency output. Illuminates red for overload conditions.


Hands free carrying case (Pictured)

Deluxe carrying case is designed to hang around your neck freeing up both hands.

PIE 422

Rent the PIE 820 Elite Multifunction Diagnostic Process Calibrator PIE 820 Elite

Request Rental Quote Above

JM Test Rental options can help you save capital, get the latest technology, and expand your capabilities. Daily, Weekly and Monthly rates are available on select items.