Product Overview: Megger DPM1000 Power Clamp Meter
Megger DPM1000 Power Clamp Meter
The new Megger DPM1000 Power Clamp Meter integrates the power meter, harmonic meter and data logger features into one easy-to-use kit. For supply side applications, the specification meets the BSEN 61010-1 CAT IV 600V specifications. Both measurements that are turned on at the touch of a button or when turning the selection dial are displayed clearly by a big backlit LCD. It also automatically switched off to save battery consumption.
The DPM1000 can measure DC, AC, pulsed and mixed currents up to 1000 A by simply clamping the jaws around the required conductor, while the supplied test leads can measure voltages up to 1000 V AC or DC. Where power measurements are to be made, all of the above techniques are carried out simultaneously. All power related parameters including energy consumption, frequency, total harmonic distortion, distortion factor and capacitance. It features auto-ranging and has 3 phase rotation indication. The DPM1000 tests Active power and power factor in single and 3 phases, the harmonic content of the signal can be shown, up to the 25th harmonic. Using the thermocouple given, temperature measurements can be taken up to 1000 ° C.
The DCM1000 is ideally suited to measuring mains power quality and applications in the development, installation, maintenance and repair of equipment and devices used in power electronics and power engineering. The unit has an internal torch that lights during the operation of the clamp and automatic non-contact voltage detection for identification of live circuits.
The DPM 1000 may be used to perform data logging to its internal non-volatile memory. You can record a maximum of 9999 readings/records to the memory over a period of time and download the data to produce graphs and reports. The record rate can be set from 1 sec to 600 sec. The accuracy of the timer is within 3 seconds per hour.
The meter uses low-power Bluetooth v4.0 wireless technology to transfer real-time data to the free Megger LinkTM app, available for both iOS and Android. The maximum communication range in open air is approximately 10 m. This function is invalid for Inrush and Phase Rotation.
Features:
- AC/DC Voltage to 1000V
- AC/DC Current to 1000A
- True RMS
- LED Display
- Phase rotation indication
- Inrush peak current
- Auto backlit display
- Frequency measurement
- Capacitance measurement
- Power Factor Measurement
- Watt measurement to 1MW
- Harmonic Measurement
- Harmonic distortion
- Diode test
- Non-Contact volt alert
- Continuity Beeper
- Data Hold/Min-Max/ Peak Hold
- Bright LED Torch
- Carrying holster/pouch
- CAT IV 600V Rating
- Bluetooth/Megger Link App
- Supplied with Carrying Case
Reviews
There are no reviews yet.