High Voltage PTS-75, 0-75 kVdc, 10 mA, DC Hipot/Megohmmeter Test Set

Product Overview: High Voltage PTS-75, 0-75 kVdc, 10 mA, DC Hipot/Megohmmeter Test Set

The High Voltage PTS-75, PTS-75F5 and PTS-75F6 are combination high voltage DC proof tester and megohmmeter. Dielectric strength and insulation resistance testing are combined into one instrument saving time, money, size and weight. Equipped with a 5-range current meter scaled 0 – 1 dc microamps for accurate current measurement down to a 10 nanoamp resolution in the x1 range. Using the alternate scale on the current meter allows the PTS Series to double as a Megohmmeter up to 7.5 teraohms, scaled 100-1 megohms, insulation resistance can be taken at any voltage. An accurate 2 range voltmeter rounds out the standard instrumentation. Additional features include ruggedized anti-static and transit protected meters, rugged single piece design with foam padded handles, full-wave bridge rectifier, internal shorting solenoid with discharge resistors, and is CE marked.

NOW OFFERING DAILY RENTAL RATES ON THIS ITEM! CALL TODAY!

High Voltage PTS-75 Features:

• Combination high voltage DC proof testers, or hipots, and high voltage megohmmeters
• Perform Hipoting, or leakage current measurement, and insulation resistance testing can now be performed with one instrument
• Anti-static glass front meters
• Rugged, transit protected, field proven construction
• Internal HV shorting solenoid with discharge resistor
• Portable

High Voltage PTS-75 Specs:

• Input:
  • 120 V, 60 Hz, 10 Amps
  • (F) 230 V, 50/60 Hz, 5 Amps
  • +/- 1% Input voltage regulator *
• Output: 0-75 kVdc, 10 mA, Negative polarity. Positive ground.
• Duty: Continuous
• Kilovoltmeter: 3.5”, Scaled 0-37.5/75 kVdc, +/- 2% F.S.
• Currentmeter: 3.5”, Scaled 0-1.0 µAdc, +/-2% F.S. with multipliers of x1, x10, x100, x1k, x10k   Guard/Ground Load Return
• Megohmmeter: Scaled 100-1 MOhms with multipliers of x0.1, x1, x10, x100, x1k
• Case Dimensions: 14'' w x 11'' d x 18'' h
• Case weight: 68 lbs.
• Output Termination: 20 ft. shileded output cable with alligator clamp
• Additional Cables and accessories: 
  • 20 ft. Return lead with alligator clamp
  • 20 ft. Ground lead with alligator clamp
  • 10 ft. Input line cord
  • Ground stick with 20 ft. lead and clamp

* Due to the ferro-resonant designed input voltage regulator, if an inverter is used for the voltage source, it must produce a ''true sine wave'' output and not a ''modified sine wave'' (square wave).  This model is input frequency sensitive: either 50Hz or 60Hz but not both.  Specify when ordering.