Greenlee EK425LD012 Crimping Tool w/CJD3O jaws (EK425)

Greenlee EK425LD012 Crimping Tool w/CJD3O jaws w/12 volt battery charger

View Quote List


SKU: EK425LD012 Categories: ,


Daily, Weekly, and Monthly rates are available on select items.

Product Overview: Greenlee EK425LD012 Crimping Tool w/CJD3O jaws (EK425)

Greenlee EK425LD012


  • The Greenlee EK425LD012 is operated withone hand, leaving the other hand free to position the cableand connector
  • The crimping jaws open wide to fit easily over connectors
  • To help prepare for a crimp, the jaws can be jogged closed until they just grip the connector, allowing the operatorto position the cable in the connector before finishing thecrimp
  • The EK425L will complete about 325 crimps per battery charge on 4/0 AWG splices
  • When a crimp is fully completed, the EK425L signals the operator by automatically opening the jaws
  • It is then ready to make the next crimp
  • And, when the crimping jaws need to be opened before a crimp is complete, the operatorcan simply push a button on the back side of the tool
  • Intelligent Crimping System Technology includes a pressure sensor that monitors the crimping force of each crimp andprovides the operator a visual and audible alert if the force is below specificationsSpecifications
  • Accessory : CJXPJ Crimping Jaw With Nicopress X, P, And J Die Grooves, CJB Cutting Jaw For One-Time Disposable Lock Hasps, CJ22 Crimping Jaw For Use With KC22 And KA22 Crimping Dies, KD6-27 WStyle Cutter Dies For ACSR To4/0 AWG, F020735 Kearney D Crimping Die (Adap
  • Battery : 18 V, 3.0 AMP-HR Lithium-Ion
  • Battery Charger : 12 V
  • Battery Charge Time : 30 MINT
  • Crimp Cycle Time : Approximately 4 S
  • Crimping Capacity : Connector 10-1/0 AWG 5/8 IN Service Entrance Connectors, 1/0-4/0 AWG 0.840 Service Entrance Connectors, 6 – 4/0 AWG Aluminum H Taps, 10-2 AWG Copper H Taps, 6-2/0 AWG Copper Tension Splices, 6-4/0 AWG All Aluminum Tension Splices, 4-1/0 AWG One Piece ACSR
  • Crimping Force : 6.000 TON (54.000 KN)
  • Estimated Cycles per Charge : Approximately 325
  • Handle Type : Cushioned Grip Ergonomic
  • Jaw : CJD3O
  • Length With Jaws : 18-1/2 IN (470.000 MM)
  • Replacement Part : CJD3O Crimping Jaw Unit-D3 And O Die Grooves, CJD3BG Crimping Jaw Unit-D3 And BG Die Grooves, CJK Crimping Jaw Unit ForKearney O Dies, CJD3 CrimpingJaw With Single D3 Die Groove, 52176 18 V 3.0 AMP-HR Li-IonBattery, CP1 Tool Pouch
  • Sub Brand : Gator (EK425)
  • Weight With Jaws : 6.800 LB (3.000 KG)
  • Width Head Open : 4.000 IN (108.000 MM)

    Need your tool(s) repaired? Click here to request a quote.

Rent the Greenlee EK425LD012 Crimping Tool w/CJD3O jaws (EK425)

Request Rental Quote Above

JM Test Rental options can help you save capital, get the latest technology, and expand your capabilities. Daily, Weekly and Monthly rates are available on select items.