Fluke Link IQ Copper and Fiber Cable Testing Kits

View Quote List


Product Overview: Fluke Link IQ Copper and Fiber Cable Testing Kits

Highlighted Features:

Trustworthy Cable Testing. Essential Network Testing.

  • Accurately measure network cabling performance up to 10 Gig using frequency-based measurements.
  • Efficiently troubleshoot active networks by providing vital information about connected switches, including Switch Name, IP Address, MAC Address, Port Number, and VLAN details.
  • Ensure connectivity to TCP/IP networks by testing IP configuration and conducting ping tests.
  • Verify the responsiveness and availability of Gateway and DNS servers.
  • Seamlessly install and troubleshoot PoE (Power over Ethernet) devices using Switch Negotiation and PoE Load test, ensuring reliable multivendor interoperability with Ethernet Alliance PoE Certification.
  • Easily identify common faults occurring during cabling installation through graphical wiremap and length tests.
  • Maintain comprehensive documentation using LinkWare™ PC reporting.
  • Fully compatible with Industrial Ethernet protocols such as EtherNet/IP, PROFINET, EtherCAT, and others.
  • Industrial Ethernet Kit specifically supports Industrial Connectors (M8D, M12D, M12X).

The LinkIQ™ Network+Cable Tester is specifically created to fulfill the requirements of professionals in cable testing and network troubleshooting. This versatile device ensures reliable cable performance validation, supporting speeds of up to 10 Gig, through precise frequency-based measurements. It not only provides distance to fault information but also generates a wire map of the tested cable, facilitating easy identification of potential issues. Moreover, the LinkIQ™ conducts ping tests to verify connectivity and offers convenient diagnostics for the nearest switch, enabling efficient detection of crucial network problems and validation of switch configurations, eliminating the need for additional devices. Alongside these essential features, the tester includes Analog and Digital Toning capabilities, Port Blink functionality, Remote Office Locators, and seamless result management via LinkWare™ PC.

General Specifications



Languages supported in UI

English, German, French, Japanese, Spanish, Thai, Traditional Chinese, Simplified Chinese, Korean, Russian, Italian, Portuguese


1 lbs 6 oz (624g)


Type: Lithium-ion, 3.6 V, 6400 mAh
Life: 8 hours typical
Charge time: 4.5 hours
Charging temperature range: 0 °C to +40 °C

Power Adapter

Input: 100 to 240 VAC ±10%, 50/60Hz
Output: 15 VDC, 2 A maximum
Class II

Host Interface

USB type C


800 x 480 color capacitive multi-touch


8.5 in x 4.5 in

Operating Temperature

0°C to 45°C

Storage Temperature

-10°C to +60°C

Operating Relative Humidity

0 % to 90 %, 0°C to 35°C
0 % to 70 %, 35°C to 45°C

Operating Altitude

4,000 m
3,200 m with ac adapter


Random, 2 g, 5 Hz-500 Hz


1 m drop, 6 sides

Active Network Diagnostics



Diagnostic Protocols

Link Layer Discovery Protocol (LLDP)
Cisco Discovery Protocol (CDP)
Fast Link Pulses (FLP)
Internet Control Messaging Protocol (ICMP)
Dynamic Host Configuration Protocol (DHCP)

IP Address Setup

LinkIQ address, DNS Server, Gateway for IPv4 or v6 either manually or via DHCP.

IP Ping Test Results

Four response time results for target, DNS Server(s), Gateway, plus average and number lost

Nearest Device Diagnostics (If available through diagnostic protocols)

Switch Name / IP + MAC Address
Port Number
Advertised Data Rates
Advertised Duplex

Power Over Ethernet Compatibility

Ethernet Alliance Certified to IEEE 802.3af/at/bt
Hardware negotiation with signature resistance
Software negotiation with LLDP/CDP

Power Over Ethernet Diagnostics

Advertised Power Class (0-8)
Advertised Available Power
Powered Pairs
Diagnostics for both Single and Dual signatures

Power Over Ethernet Measurements

Loaded Voltage (V)
Loaded Power (W)

Port Blink

Blink the light of the connected port

Cable Test Specifications



Test Port

Shielded 8-pin modular jack accepts 8-pin modular (RJ45) plugs.

Commissioning Autotests

10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-T, Wire map Only
Test Speed: 6 seconds for lengths < 70 m

Cable Types

Balanced twisted-pair cabling
Unshielded twisted-pair
Screened twisted-pair
2-pair and/or 4-pair

Wire Map-Only Tests

Document wire map
Length of each pair
Diagnose split pairs
User selectable T568A or T568B
User selectable crossover settings (Straight through, Half-crossover, Full-crossover)
Test speed: 1 second for lengths < 120 m

Length (Maximum)

305 m (1000 ft)

Nominal Velocity of Propagation (NVP)

User settable

Tone Generator

Generates digital tones compatible with Fluke Networks IntelliTone probe.
Generates analogy tones compatible with general analog probes.

Remote ID Locators

Use remote ID terminations to identify up to 7 unique ports or office outlets


There are no reviews yet.

Be the first to review “Fluke Link IQ Copper and Fiber Cable Testing Kits”

Your email address will not be published. Required fields are marked *