TEST EQUIPMENT
MADE EASY ™

Fluke Calibration P3830 Hydraulic Dead Weight Tester

P3830 Hydraulic Dead Weight Tester

QTY:
 
Manufacturer

SKU: P3830 Category:

Product Overview: Fluke Calibration P3830 Hydraulic Dead Weight Tester

Fluke Calibration P3830 Hydraulic Dead Weight Tester


  • Select from two accuracy classes; 0.02% or 0.015% of reading
  • Includes hand pump and intensifier for generating high pressures
  • Tungsten carbide piston and cylinder provides long term stability and durability
  • Mass set can be trimmed to local gravity FOC

    The Pressurements P3800 Series High Pressure Hydraulic Deadweight Testers are the culmination of over 50 years of experience in the production and design of high performance pressure standards. With features and options designed to improve accuracy, increase reliability, and simplify operation, the P3800 Series can be used to calibrate virtually any high pressure sensing device including transducers, transmitters, gauges, pressure switches or other calibrators.


    Three models are available, P3830, P3840 and P3860 offering pressure ranges of 30,000, 40,000 and 60,000 psi respectively (2000, 3000 and 4000 bar). All models are available in two accuracy classes, 0.02% or 0.015% of Reading. The Series P3800 offers an accurate and economical approach to calibrating high pressure devices.


    Max Range: 30000 PSI (200 MPa)










    Accuracy

    Accuracy* Standard accuracy is 0.02% of Reading*. Optional accuracy of 0.015% of Reading is vailable. Calibration certificate with traceability to NIST is provided with each instrument. An optional ISO/IEC 17025 accredited calibration certificate is available. *Accuracy is based on % of Reading from 10% to 100% of the piston range when used in accordance with the corrections found on the calibration certificate. Below 10%, ± (accuracy class) x 10% of the piston range.




















    Materials of Construction

    Standard weight material Series 3 non-magnetic, austenitic, stainless steel
    Weight density 7.8 g/cm3
    Piston Material Tungsten carbide with nickel binder
    Cylinder Material Tungsten Carbide with cobalt binder
    Thermal Coefficient of Expansion 11 ppm/°C


























    General

    Test port adapters 9/16 – 18 UNF (Autoclave); 3/8 BSP; 1/2 BSP & 3/4 BSP
    Instrument Weight 66 lbs. (30 Kg) Instrument Base only
    Instrument Size 18 in. X 13.5 in. X 19 in. (455 X 340 X 478 mm)
    Reservoir Volume 235 cc (14.3 cu.in.)
    Intensifier ratio 7 to 1
    Seal Materials Nitrile
    Operating Fluid Dioctyl Sebacate (DOS), our reference 55-600