A2LA Accredited Laboratory NAIL Accredited Laboratory
Menu

Fluke Calibration P3223 Water Dead Weight Tester

P3223 Water Dead Weight Tester

SKU: P3223 Category:
 

Description

Fluke Calibration P3223 Water Dead Weight Tester


  • Built-in hand pumps standard
  • Mounted spirit level with adjustable feet
  • Units can be trimmed to local gravity FOC

    The P3200 Models are available in single or dual piston formats for increased operating ranges. Units can be supplied in psi, bar, kgf/cm², and MPa. These robust instruments are highly accurate, quick and easy to use. Units feature a built-in priming pump for large volume applications, piston flotation indicators and a high quality screw press for fine pressure control.


    Optional PressCal software is available for pressure calculations and certificate generation.


    The P3200 Series is the culmination of over 50 years of experience in the production and design of high performance pressure standards. With features designed to improve accuracy and performance, increase reliability and simplify operation these deadweight testers can be used to calibrate virtually any pressure sensing device, including transducers, transmitters, gauges or pressure switches. 

    Each instrument is supplied with a detachable lid which makes it neat, compact and easily portable. The weight masses are stored in a high-quality case with a self locking mechanism to protect them during transit. 

    All units are provided with a traceable certificate of accuracy, weight mass details, 1/8 inch, 1/4 inch, 3/8 inch and 1/2 inch NPT or BSP female adaptors, operating fluid (where applicable) and spare seals. 

    The piston/cylinder assemblies are manufactured to the very highest standards with certified accuracies traceable to international standards laboratories such as the National Institute of Standards and Technology (NIST).

    Max Range: 5000 PSI (35 MPa)


  • dual range










  • Accuracy

    Accuracy±0.015% of reading (±0.008% optional)

    *Accuracy based on % of reading from 10% to 100% of the piston range when used in accordance with the corrections found on the calibration certificate. Below 10% ± (accuracy class) x 10% of the piston range.



























    Materials of Construction

    Standard weight materialSeries 3 non-magnetic austenitic stainless steel
    Weight density7.8 g/cm³
    Optional fractional weightsSolution heat treated aluminum
    Weight density2.7 g/cm³
    Piston materialTungsten carbide with nickel binder
    Density- 15.0 g/cm³
    Cylinder materialHardened martensitic steel
    Tungsten carbide (water above 500 psi, 35 bar)
    Thermal coefficients of expansionOil piston/cylinder 16.5 ppm/°C
    Water (above 500 psi, 35 bar) 11 ppm/°C





























    General

    Test port adaptors1/8, 1/4, 3/8 and 1/2
    NPT or BSP
    Instrument weight36 lbs (16 kg)
    Instrument size(W x D x H) 17.5 in x 12 in x 8.5 in (440 mm x 300 mm x 215 mm)
    Mass set weight (typical)80 lbs (36 kg)
    Reservoir volume150 cc
    Screw press displacement5.5 cc
    Pump displacement4.7 cc per stroke
    O-ring seal materialsBuna N as standard, Viton and EPDM available
  • Additional information

    Procurement Options

    Manufacturer