The P3200 Models are available in single or dual piston formats for increased operating ranges. Units can be supplied in psi, bar, kgf/cm², and MPa. These robust instruments are highly accurate, quick and easy to use. Units feature a built-in priming pump for large volume applications, piston flotation indicators and a high quality screw press for fine pressure control.
Optional PressCal software is available for pressure calculations and certificate generation.
|Accuracy||±0.015% of reading (±0.008% optional)|
*Accuracy based on % of reading from 10% to 100% of the piston range when used in accordance with the corrections found on the calibration certificate. Below 10% ± (accuracy class) x 10% of the piston range.
Materials of Construction
|Standard weight material||Series 3 non-magnetic austenitic stainless steel|
|Weight density||7.8 g/cm³|
|Optional fractional weights||Solution heat treated aluminum|
|Weight density||2.7 g/cm³|
|Piston material||Tungsten carbide with nickel binder |
Density- 15.0 g/cm³
|Cylinder material||Hardened martensitic steel |
Tungsten carbide (water above 500 psi, 35 bar)
|Thermal coefficients of expansion||Oil piston/cylinder 16.5 ppm/°C |
Water (above 500 psi, 35 bar) 11 ppm/°C
|Test port adaptors||1/8, 1/4, 3/8 and 1/2 |
NPT or BSP
|Instrument weight||36 lbs (16 kg)|
|Instrument size||(W x D x H) 17.5 in x 12 in x 8.5 in (440 mm x 300 mm x 215 mm)|
|Mass set weight (typical)||80 lbs (36 kg)|
|Reservoir volume||150 cc|
|Screw press displacement||5.5 cc|
|Pump displacement||4.7 cc per stroke|
|O-ring seal materials||Buna N as standard, Viton and EPDM available|