Product Overview: Fluke Calibration 6531-20M Electronic Dead Weight Tester
Fluke Calibration 6531-20M Electronic Dead Weight Tester
A powerful, complete hydraulic pressure calibration system to cover a wide workload
Fluke Calibration improved the hydraulic pressure calibration process with the introduction of E-DWT-H electronic deadweight tester. E-DWT-H is an electronic calibrator designed to deliver traditional hydraulic deadweight tester performance with digital measurement features and convenience. Some improvements offered by E-DWT-H include:
- No weights to load and unload, transport or send out for calibration
- Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature
- No piston-cylinder changes
- No significant sensitivity to level or vibration
- Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration
- Operates in any unit of measure, switching easily from one unit to the next
The E-DWT-H is at home in metrology and calibration labs, on the production floor or in the field. It can operate with a wide selection of test mediums, including Sebacate calibration fluid, mineral oil, water and other liquids. ± 0.02 % of reading total one-year measurement uncertainty rivals the best laboratory deadweight testers.
Media: Oil or Water
Range (PSI): 300 to 3,000
Range (MPa): 2 to 20
General | |
Power requirements | |
To RPM4-E-DWT: | 12 V dc 1.2 A |
To AC to DC power supply: | 100 V ac to 240 V ac, 50/60 Hz |
Temperature range | |
Storage: | – 20 °C to 70 °C |
Operating: | 10 °C to 40 °C |
Relative Humidity | |
Storage: | 0 % to 100 % |
Operating: | 0 % to 70 % |
Weight | |
1 Q-RPT: | 12 kg (26 lb) approximate |
2 Q-RPT: | 14 kg (30 lb) approximate |
Dimensions | |
E-DWT footprint: | 41.4 cm W x 37.1 cm D (16.3 in x 14.6 in) |
E-DWT height: | 26.9 cm (10.6 in), 33.6 cm (13.2 in) to max variable volume handle height |
Pressure range | Up to 200 MPa (30k psi), depending on configuration |
Operating medium | All 6531 and 6532 E-DWT Kits are shipped dry, standard preparation. Can be filled with di-ethyl-hexyl sebacate, silicon oils, propylene glycol, fully fluorinated liquids, partially fluorinated liquids, isopropyl alcohol and distilled water or mineral oil. |
Reservoir capacity | 300 cc (18 in3) |
Variable volume displacement | 3 cc (0.18 in3), 200 MPa (30,000 psi) maximum |
Filling and priming pump displacement | 3.7 cc (0.23 in3) |
TEST pressure connection | DH500 female, 200 MPa (30k psi) maximum working pressure. Adapters included for 1/8 in, 1/4 in, 3/8 in and 1/2 in NPT, 1/8 in, 1/4 in, 3/8 in and 1/2 in BSP, M20 x 1.5 and M14 x 1.5. Adapter maximum working pressure is 140 MPa (20k psi). Note: DH500 is a gland and collar type fitting for 6 mm (1/4 in) coned and left hand threaded tubes equivalent to AE F250C, HIP HF4, 9/16-18 UNF, etc. |
Pressure Limits | |
Maximum Working Pressure: | Range of RPM4-E-DWT monitor’s Hi Q-RPT |
Maximum priming pump pressure: | 700 kPa (100 psi) |
Maximum Working Pressure: | with Lo Q-RPT selected: Range of RPM4-E-DWT monitor’s Lo Q-RPT |
Communication ports: | RS-232 (COM1, COM2) |
Pressure measurement | |
Warm up time | 15 minute temperature stabilization recommended from cold power up |
Normal Operating Temperature Range | 10 °C to 40 °C (50 °F to 104 °F) |
Resolution | Default: 0.01 % of active range User adjustable to 1 ppm of Q-RPT maximum or 10 ppm of active AutoRange, whichever is larger |
Precision1 | ± 0.018 % of reading or 0.0018 % of Q-RPT span, whichever is greater |
Predicted Stability2 | |
One year: | ± 0.0075 % of reading |
Two year: | ± 0.015 % of reading |
Measurement Uncertainty3 | |
One year: | ± 0.02 % of reading or 0.002 % of Q-RPT span, whichever is greater |
Two year: | ± 0.025 % of reading or 0.0025 % of Q-RPT span, whichever is greater |
Reviews
There are no reviews yet.