Fluke 709/709H Precision Loop Calibrator

Product Overview: Fluke 709/709H Precision Loop Calibrator

709/709H

The Fluke 709 mA loop calibrator is designed to save time and produce high-quality results. This tool reduces the time it takes to measure, or source, voltage or current and power up a loop.

Features

The Fluke 709 Precision Loop Calibrator is built around a user friendly interface with a Quick-Set rotary encoder knob. The protective holster easily fits into a technician’s hand and the large backlit display is easy to read, even in dark, cramped worked areas. The 709 offers:

• Best-in-class accuracy at 0.01% reading
• Small rugged design operates on (6) standard AAA batteries
• Intuitive user interface with Quick-Set knob for fast setup, easy use
• Built in selectable 250 Ω resistor for HART communication
• 24 V DC loop power with mA Measure Mode (-25% to 125%)
• Resolution of 1 µA on mA ranges and 1 mV on voltages ranges
• Simple two wire connection for all measurements
• Auto Shutdown to conserve battery life (adjustable up to 30 minutes)
• Variable step & ramp time in seconds
• Adjustable span selection (0 to 20 mA or 4 to 20 mA)
• Valve Test (simulate defined mA values with % keys)Fluke 709 Precision Current Loop Calibrator including:
  • AC175 Alligator Clip Set
  • TL75 420l Test Leads
  • Soft Case
  • Six AAA batteries (installed)
  • Product Manual CD-ROM
  • Quick Reference Guide
  • Safety Information

  Specifications

  Detailed Specifications
  Functions	mA source, mA simulate, mA read, mA read/loop power, and volts read.
  Ranges	mA (0 to 24mA) and Volts (0 to 30VDC)
  Resolution	1 µA on mA ranges and 1 mV on voltage range
  Accuracy	0.01% +/- 2 counts, all ranges (@23° +/- 5°C)
  Operating Temperature Range	-10 °C to 55 °C  (14 °F to 131°F)
  Humidity Range	10 to 95% non-condensing
  Stability	20 ppm of F.S. /°C from -10°C to 18°C and 28°C to 55°C
  Display	128 x 64 pixels, LCD Graphic w/backlight, .34 high digits
  Power	6 AAA alkaline
  Battery Life	40 hours typical
  Loop Compliance Voltage	24VDC @ 20mA
  Over-Voltage Protection	240 VAC
  Overload Current Protection	28 mA DC
  EMC	EN61326 Annex A (Portable Instruments)
  Dimensions (L x W x D)	15 cm x 9 cm x 3 cm  (6 x 3.6 x 1.3)
  Weight	0.3 kg  (9.5 ounces)
  Included Accessories	NIST traceable calibration certificate with data, batteries, test leads, and manual
  Warranty	Three year