Product Overview: CDI COMPUTORQ3 1/2” Drive Electronic Torque Wrench
Torque range: 300-3000 in. lb. / 25-250 ft. lb.
Length: 27 in.
Weight: 3.5 lbs.
Sleek New Design
15-Degree Flex Ratcheting Head
Push Button Socket Release Head
Large, Easy to Read Digital Display
Long Battery Life, Uses 2 Each CR123 Lithium Batteries
Ergonomically Designed Molded Nom-Slip Rubber Grip
Torques in Both Clockwise and Counterclockwise Directions
Battery Saving Auto-Shutoff After Two Minutes
COMPUTORQ3 Remembers Last Unit and Torque Setting Selected
Audible Tone Sounds when Set Torque Value is Reached, if the Set Torque Value is Exceeded, an Alarm Tone will Sound.
3 Color LED Light Bar
YELLOW LED Indicates Approaching Desired Torque Setting
GREEN LED Indicates Desired Torque Value is Reached
RED LED Indicates Fastener was Overtorqued, Loosen and Retighten.
When Desired Torque Value is Reached, Display will Hold Value and Flash for Ten Seconds.
COMPUTORQ3 will Operate in any of Four Torque Units, Foot Pounds (Ft. Lbs.), Inch Pounds (In. Lbs.), Newton Meter (NM) or Kilogram Centimeter (Kg. CM.).
ACCURACY: ± 2% CW of Readings from 20% to 100% of Full Scale ± 3% CCW of Readings from 20% to 100% of Full Scale
N.I.S.T. Traceable Certificate of Calibration Included