Additel ADT761-D Automated Pressure Calibrator – Discontinued

Product Overview: Additel ADT761-D Automated Pressure Calibrator – Discontinued

Additel ADT761-D Discontinued 

Replaced by the Additel 761A

Additel ADT761-D      

Fully automated pressure calibrator with built-in pressure generator / controller to as high as 15 psi  (1 bar) or as low as 0.01 Pa (0.00004 inH2O)

•        Pressure Range: 0.95 to 1 bar (-13.5 to 15 psi)

•        0.02%FS/ 0.05%FS accuracy

•        Dual pressure modules (Pressure Module 1: -25 to 25 mbar (-10 to 10 inH2O) (Pressure Module 2: 0.95 to 1 bar (-13.5 to 15 psi)

•        Built-in filter and liquid trap with venting system prevents contamination of the calibrator

•        Portable (16.3 lb)

With a built-in high performance electronic pump and precision pressure controller, the 761 series portable automated pressure calibrators provide a turn-key solution for calibration of gauges, transmitters, and switches both in the field and in the laboratory. In a portable package, this calibrator can automatically generate pressures from 95% vacuum to 15 psi (1 bar) with 0.02% FS accuracy. To improve the calibrator accuracy, two pressure modules with differing ranges are built-in and integrated with the internal pump and controller.

 The 761-LLP is specially designed for low pressure calibration, and pressures can be set to as low as 0.01 Pa (0.00004 inH2O) with a control stability better than 0.05 Pa (0.0002inH2O)..

 With optional external pressure modules (160 series), the 761 can measure pressures up to 10,000 psi (700 bar) with 0.025%FS accuracy. In addition to the pressure generation, control, and measurement capabilities, the 761 also features HART communication capability, supplies 24V loop power, and reads the current or voltage produced by the pressure transducers. The 761 is a state of the art automated pressure calibrator which brings automated pressure calibration to the field.

Additel ADT761-D Features:

 

• Pressure Range 
  Pressure generated by built-in pump and controlled automatically from 90% vacuum to 15 psi (40 bar)
Pressure measured with external pressure modules (160 series) to 10,000 psi (700 bar)
Accuracy (Fully temperature compensated)
0.02%FS 
0.05%FS (ADT761-LLP)

• Control Stability
  <0.005%FS
ADT761-LLP:  < 0.05 Pa (0.0002 inH2O)

• Contamination prevention system
  Built-in filter and liquid trap with venting system prevent contamination of the calibrator 
Solid particles can be blocked by built-in filter
A small amount of Liquid can be collected by the built-in liquid trap
Both solid particles and liquid can be blown out through the venting system

• Automation and Test Program
  Fully Automated pressure calibration
Task preset and auto run
Auto step

• Easy to Use
  User friendly interface 
Intuitive icon driven menu structure

• Sourcing and Measuring electrical signals
  Measure mA with 0.01%RD + 1.5μA accuracy
Measure V with 0.01%RD + 1.5mV accuracy
Source/sink 0 to 22mA current
24 VDC loop power supplied to pressure transmitter during test
Automated switch test

• Misuse Protection
  Up to 30V misuse protection  on any two sockets

• Display
  7′ LCD color screen (800X480)

• Documenting and data logging
  Task management capability
Internal memory stores 200 tasks
Download tasks and upload results

• HART Communication capability
  Support HART instrumentation

• Rechargeable battery: 
  Rechargeable battery with up to 8 hours operation between charges

• Leak testing: 
  Apply leak test to an external pressure system to determine the magnitude of pressure variations due to leaks

• Pipeline Protection: 
Special design the pipeline layout to avoid possible blockage and leakage

• Portable: 
  Only 16.3 lb

• Multi Lingual Interface
  English, German, French, Italian, Spanish, Portuguese, Simplified Chinese
(Traditional Chinese, Japanese and Russian are available per request)

• NIST Traceable:
  NIST traceable calibration with data (included)

See more Pressure Calibrators here.