Product Overview: Additel ADT 121 Series Pressure Manifolds / Pneumatic, -15psi to 3000psi (-1 to 200 bar)
12X Series Pressure Manifolds
The 12X series pressure manifolds are designed for expanding pressure test ports during pressure calibration. The Additel 121 and 125 pressure manifolds are used for pneumatic pressure calibration up to 3000 psi (200bar), while the Additel 123 and 126 manifolds are compatible to hydraulic pressure applications up to 10,000 psi (700 bar). A filter is built-in with the 121 and 125 pneumatic pressure manifolds to prevent contamination introduced by devices under test. There are four hand-tight quick connectors pre-installed on each manifold. The manifold arms of the 125 and 126 are foldable to allow the user to adjust the position of the DUTs. Additel 12X series pressure manifolds allow you to connect without the use of wrenches or Teflon tape which increases your productivity when using calibration pumps, pressure controllers, dead weight testers, or piston gauges.
Model |
Description |
ADT121-N |
1/4NPT Female to four 1/4NPT Female hand-tight quick connectors |
ADT121-N2 |
1/2NPT Female to four 1/2NPT Female hand-tight quick connectors |
ADT121-M |
M20×1.5 Female to four M20×1.5 Female hand-tight quick connectors |
ADT121-B |
1/4BSP Female to four 1/4BSP Female hand-tight quick connectors |
Note: A test hose (male adapter to male adapter) is included with every Additel 12X pressure manifold.
Reviews
There are no reviews yet.