ELECTRICAL TESTING SERVICES
Your one stop shop for all electrical testing services. JM Test Systems is committed to providing quality and reliable service to our customers. Our dielectric testing laboratory can help keep your team safe and in compliance.
NAIL FOR PET ACCREDITED
ACCREDITED TESTING COMPANY
Electrical testing services for gloves, grounding cables, jumpers, hot sticks and more. The Electrical Safety Laboratory (ESL) at JM Test Systems provides solutions in all areas of PPE and other electrical safety equipment supplies. When new items are purchased we can also perform the required testing on all electrical safety/PPE equipment before we ship.


YOUR COMPLETE SOLUTION
Electrical Testing for Safety Equipment
Electrical Safety
Lab Accreditation
JM Test Systems has been approved as an Accredited Testing Laboratory to test the following lineman’s high voltage protective equipment:

- Insulating Gloves
- Insulating Blankets
- Insulating Covers
- Insulating Sleeves
- Insulating Electrical Tools
- Insulating Line Hose
- Rubber Insulating Matting
- Dielectric Overshoe Footwear
- Insulating Bucket Liners
- Hot Sticks & Live-Line Tools
- Insulating Aerial Devices
- Portable Grounding Jumper
JM Test System’s is fully accredited for testing high voltage rubber insulated protective goods, to the following ASTM/ANSI Standards:
| Products | ASTM/ANSI STANDARDS |
|---|---|
| Gloves | D120 / F496 |
| Sleeves | D1051 / F496 |
| Blankets | D1048 / F479 |
| Line Hose | D1050 / F478 |
| Rubber Insulation Covers | D1049 / F478 |
| Rubber Insulating Matting | D178 |
| Hot Stick and Hot Line Tools | F711 |
| Insulating Plastic Guards | F712 |
| Insulating Aerial Devices | ANSI-A92.2 |
| Protective Grounds used on de-energized electric power lines | F855 & F2249 |
| Insulated Electrical Tools | ASTM F1505 |
ONSITE SERVICES
JM techs at your location to test your PPE, blankets, hotsticks, hot arms, grounds, trucks, hot tools, and more. After hours testing available.
ELECTRICAL SAFETY SALES
Leading distributor for electrical safety supplies / personal protective equipment. Purchase arc flash, grounds, sticks, gloves, and more.
PPE MANAGEMENT
JM Test Systems’ PPE Rotation Management Program helps keep you in compliance with all OSHA safety standards.
Electrical Safety
BENEFITS & ADDED SERVICES
Saves thousands on shipping charges & possible claims.
Retest Notices via email and phone prior to items being due.
Cut down on hold ups for turn-around time.
Expedited services are available 24/7.
Available on all equipment at no additional charge.
All new equipment is tested and sent out with current dates.
Onsite testing available. We come to you!
We guarantee your questions will be answered quickly.
TOTAL RECONDITIONING OF YOUR EQUIPMENT.
Send in your line hoses, hot sticks, blankets, arc flash suits, and tools. JM Test Systems’ Electrical Safety Lab provides cleaning, testing, repair and even reconditioning on all types of electrical safety equipment.
ELECTRICAL PERSONAL PROTECTION EQUIPMENT REQUIREMENTS AND OSHA REGULATIONS
JM Test System is concerned about you and your employees’ safety. Our electrical testing services help keep you in compliance with all OSHA. We have provided these helpful links to assist you with the various standards and regulations on PPE.
Why and When to Test Electrical Personal Protection Equipment PPE:
Industry standards and regulations:
- OSHA 29 CFR 1910 and 1926
- NFPA NEC 2008
- Various ASTM Requirement
What OSHA Standards Address Electrical Safety?
OSHA standards cover many electrical hazards in many different industries. OSHA general industry electrical safety standards are published in Title 29 Code of Federal Regulations (CFR), Part 1910.302 through 1910.308 – Design Safety Standards for electrical System and 1910.331 through 1910.335 – Electrical Safety-Related Work Practices Standards.
OSHA’s electrical standards are based on the National Fire Protection Association Standards NFPA 70, National Electric Code, and NFPA 70E, Electrical Safety Requirements for Employee Workplaces.
OSHA also has electrical safety standards for the construction industry, in 29 CFR 1926, Subpart K. OSHA’s standards for marine terminals, in 29 CFR 1917, and for long shoring, in 29 CFR 1918, reference the general industry electrical standards in Subpart S of 1910. The shipyard standards in 29 CFR 1915 cover limited electrical safety work practices in 29 CFR 1915.181.
For more information on OSHA Standards / NFPA codes, follow the links below:
OSHA 29 CFR 1910.137 • Electrical protective devices
OSHA 29 CFR 1910 Subpart S • Safeguards for personnel protection
OSHA 29 CFR 1226 • Safety and Health Regulations for Construction
OSHA 1910.137(c)(2)(xii) Table I-5
|
|
|---|---|
|
TYPE OF EQUIPMENT |
WHEN TO TEST |
| Rubber insulating line hose | Upon indication that insulating value is suspect and after repair. |
| Rubber insulating covers | Upon indication that insulating value is suspect and after repair. |
| Rubber insulating blankets | Before first issue and every 12 months thereafter; 1 upon indication that insulating value is suspect; and after repair. |
| Rubber insulating gloves | Before first issue and every 6 months thereafter; 1 upon indication that insulating value is suspect; after repair; and after use without protectors. |
| Rubber insulating sleeves | Before first issue and every 12 months thereafter; 1 upon indication that insulating value is suspect; and after repair. |
(1) If the insulating equipment has been electrically tested but not issued for service, it may not be placed into service unless it has been electrically tested within the previous 12 months.
Find a Testing Location Near You
JM Test Systems has locations across the USA including Louisiana, Illinois, Texas, Alabama, Pennsylvania and Montana, making our company your one-stop service center and trusted partner.

Electrical Safety Testing FAQs
What electrical safety equipment do you test?
JM Test’s NAIL accredited electrical safety labs are the experts in testing, calibrating and certifying rubber insulating gloves, sleeves, blankets, line hoses, hot sticks and grounding jumpers, even high voltage and custom grounds. We can test all the equipment on a bucket truck.
Is your electrical safety testing lab accredited?
JM Test electrical safety labs are NAIL for PET accredited, and all dielectric testing follows ASTM and ANSI specifications. Quality and safety are our commitment to your crews. We focus on calibration, so they can focus on work.
How often do rubber insulating gloves need to be tested?
Proper PPE for electrical safety is a top priority for your crews. OSHA 1910.137 requires rubber insulating gloves to be retested at least every 6 months, and sleeves and blankets at least every 12 months. JM Test can help you manage your PPE rotation so testing and calibration stay up to date, keeping your crews safe, operationally ready and in line with regulations.
How do I send PPE for testing?
JM Test has a variety of ways to get your electrical safety equipment into testing. You can ship it to the lab closest to your site, or come into any of our location storefronts and hand-deliver your assets. You can also call for a pickup: JM Test will come to you, test your equipment in our lab and deliver it back. Flexibility, quality and speed. Test Equipment Made Easy.
Do you track PPE test due dates?
JM Test’s tracking process is what sets it apart and ensures NAIL accreditation. Each piece of equipment is barcoded for step-by-step tracking. And with our Customer Portal, you can access your entire equipment portfolio for due dates and regulatory certificates, and track your equipment while it’s in testing.















