Product Overview: RKI SDM-6000 Calibration Station
RKI SDM-6000 Calibration Station
The SDM-6000 calibration stations feature a modular design, allowing multiple units to connect seamlessly without the need for tubes or cables. One power source and a single set of calibration equipment can service up to 10 SDM-6000 stations.
Up to 10 calibration stations can also be connected to a single PC for automated charging, calibration, bump testing, and data archiving. Automated routines can power up the instruments and perform scheduled tasks, even if the devices are turned off. All data collected through PC-controlled software can be centralized in a network location, accessible by any user with the software and network access.
- Simultaneously bump test, calibrate, charge, and collect data for up to 10 instruments
- No tubing, adapters, or wires required for connection
- One power source for all stations
- Configure GX-6000 parameters
- Centralize instrument data from multiple stations and locations to a single network location
- Ethernet port for LAN connectivity
- Schedule automatic calibration and bump tests
- Optional valve expansion module for up to six gas cylinders
- Optional battery-operated printer available
| SPECIFICATIONS | |
| Display | Touch panel TFT liquid crystal (3.5 inch, 320×240 image element QVGA, RGB1677 million colors) Back light |
| LED | 3 color [Green, Red, Orange]. Each status is indicated by Lighting / Blinking |
| BUMP test | Standard setting values
AIR Flush time: 15sec, GAS time: 20sec, AIR Purge time: 5sec Threshold value: ±50%, Auto Calibration: OFF, Auto alarm function check: ON Auto print: OFF Setting range AIR Flush time: 15~120sec GAS time: 20~120sec AIR Purge time: 5~120sec Threshold value: ±10~50% Auto calibration: ON, OFF Auto alarm function check: ON, OFF Auto print: ON, OFF Bump test result: Displayed on TFT liquid crystal |
| Calibration | Standard setting values
AIR Flush time: 30sec, GAS time: 90sec, AIR Purge time: 30sec Auto alarm function check: ON, Auto print: OFF Setting ranges AIR Flush time: 15~120sec GAS time: 20~120sec AIR Purge time: 5~120sec Auto alarm function check: ON, OFF Auto print: ON, OFF Calibration result: Displayed on touch screen display |
| Power (AC adaptor) | 100~240VAC~50/60Hz |
| Dimension, weight | 5.11”(W) x 13’(H) x 7.2”(D)in Approx. 3.7lb |
| Operation temperature, humidity | 0~104F, below 95~RH (no condensing) |
| USB printer port | A type: Connects SDM-6000 printer (SII, DPU-S245) via USB cable |
| RJ-45 connector | Ethernet port for a LAN connection |
| SD card slot | Compatible with SD & SDHC cards |
| Joint connector | Connecting SDM-6000 (Max 10 units) and SV-3 |
| Inlet | 4 inlets: GAS 1 / GAS 2 / GAS 3 / AIR |
| Certification | CE marking |
| Standard Functions | Charging, Cal. cap fitting status monitoring, Power ON function, Alarm activation check, multi language (English, German, Japanese, Korean, Russian, Portuguese, Spanish, Italian, French), backlight adjusting, buzzer function, self-diagnosis for instruments connection |
| Standard accessory | Operating manual, filter, connecting plate, wall mount plate, PC controller software |
| Software | PC controller software included as standard. Windows 7 & 10 compatible |
| Optional accessory | SV-3 solenoid valve adds 3 additional calibration gas inputs
AC adaptor (15W output), AC adaptor (100W output) Calibration Station utility software Calibration gas & regulators Tubing Battery powered printer |
