AreaRAE Steel Wireless Multi-Gas Monitor

RAE Systems AreaRAE Steel wireless multi-gas monitor available at JM Test SystemsKey Features

  • Up to five sensors (PID, LEL, O2 and two electrochemical toxic gas)
  • Loud buzzer and large, extra-bright warning light
  • Large LCD display and keypad
  • Rugged, weather-resistant stainless-steel housing
  • Built-in sampling pump
  • Interchangeable Li-ion or alkaline battery pack
  • Continuous operation via AC source

Advantages

  • Real-time wireless data transmission with built-in RF modem
  • View real-time sensor data and alarm status at headquarters or command center
  • ProRAE Remote software simultaneously controls and displays readings for up to eight remote detectors
  • License-free, wireless transmission with communication range up to 3km
  • Optional wall-mounting bracket or field-mounting tripod adapter

Sensor Specifications

Gas Monitor
RangeResolution
Oxygen0-30.0%0.1%
Combustible0-100% LEL1% LEL
VOCs0-199 ppm
200-2000 ppm
0.1 ppm
1 ppm
Carbon Monoxide0-500 ppm
10-2000 ppm
1 ppm
10 ppm
Hydrogen Sulfide0-100 ppm1 ppm
Sulfur Dioxide0-20.0 ppm0.1 ppm
Nitric Oxide0-250 ppm1 ppm
Nitrogen Dioxide0-20.0 ppm0.1 ppm
Chlorine0-10.0 ppm0.1 ppm
Hydrogen Cyanide0-100 ppm1 ppm
Ammonia0-50 ppm1 ppm
Phosphine0-5.0 ppm0.1 ppm
Hydrogen Chloride0.5 to 10 ppm1 ppm
Hydrogen Fluoride0.5 to 10 ppm1 ppm

 

 

 

 

 

 

 

 

 

 

 

 

Detector Specifications

Size9.25" L x 5.0" W x 9.25" D (235mm L x 127mm W x 235mm D) without handle
Weight13.85 lbs (6.3 kg) with battery pack
DetectorUp to five sensors (O2, combustible, two toxic and VOC), electrochemical sensors for toxic gases and oxygen, photoionization sensor for VOC, catalytic combustion sensor for combustible gases
BatteryRechargeable, 7.4V/4.5Ah, Lithium-ion battery pack with built-in charger (less than 10 hours charge time) or a 6 C-size alkaline battery pack
Operating HoursUp to 18 hours continuous operation
Displays2-line, 16-digit LCD with manually activated LED back light
Keypads3 operation and 4 programming keys
Direct ReadoutInstantaneous values, sensor name, high and low values for all detectors, TWA and STEL values for toxic gases and VOCs, battery voltage and elapsed time
AlarmFlashing red LED cluster to indicate exceeded preset limits, low battery or sensor failure
Alarm SettingSeparate alarm limit settings for TWA, STEL, Low and High alarm
Audible AlarmBuzzer, 100dB buzzer at 10cm (typical)
Visual AlarmFlashing red LED cluster
Alarm ModeLatching/automatic reset
Data Logging4,000 points for each sensor with time stamp, serial number, user ID, site ID
Data Storage20,000 readings (64 hours, 5 channels at 1 minute intervals) in non-volatile memory
Datalog IntervalProgrammable 1 to 3,600 sec
CommunicationUpload data to PC and Download monitor setup from PC through RS-232 link to serial port on PC
EM ImmunityNo effect when exposed to 0.43 mW/cm2 RF interference (5-watt transmitter at 30cm)
Safety CertificationCSA Classified for use in Class I, Division 2, Groups A, B, C, and D (w/900 MHz modem)
Frequency902 to 928 MHz (License-free)
RF RangeUp to 2 miles (900 MHz), extendable with RAELink2 Repeaters
Error Detection32 bit CRC, resend on error
CallibrationTwo-point field calibration for fresh air and standard reference gas
Sampling PumpInternal integrated diaphragm pump with programmable High (400cc/min) and Low (300cc/min) flow rate settings
Low Flow AlarmAuto shutoff pump at low-flow condition
Temperature-20° to 45° C (-4° to 113° F)
Humidity0% to 95% relative humidity (non-condensing)
AttachmentShoulder strap, optional tripod/wall mounting bracket
OptionalIntegrated GPS receiver

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*Specifications are subject to change.