Hart 475, Altek 820, Beta 321 Calibrators and Communicators and More!

Emerson Hart, Altek and BetaMartel calibrators & communicators available at JM Test Systems for purchase or rental.Altek Calibrators

Ametek Dry Block Calibrators

Beta Pressure/Temperature Calibrators

Fluke Calibration / Hart Scientific Dry Block Calibrators

Hart Communicators

Why Calibrate Test Equipment?Martel Process Calibrators

Meriam Communicators and Manometers

PIE Calibrators

Thermoprobe Thermometers

ProCalV5 Calibration Management Software

 

 

Altek Calibrators available at JM Test Systems   To view the Altek product line, please click here.

WE ALSO REPAIR AND CALIBRATE
ALTEK CALIBRATORS!CLICK HERE TO REQUEST A QUOTE.

Altek 334 Loop Calibrator available at JM Test Systems

Altek 334 Loop Calibrator  –  Click to View Altek 334 Loop Calibrator Datasheet

Features:

  • All 4 to 20 mA Loop Functions –
    Source 0.00 to 24.00 mA or -25.0 to 125.0% read mA or percent to 52.00 mA, simulate 2-wire transmitters, measure -99.99 to 99.99 volts DC power & read 2-wire transmitters.
  • Quik-Chek Switch –
    Select 4 or 20 mA output or 2-wire simulation. Accurate to ±0.006 mA.
  • Full Range 10 Micro amp Resolution –
    Adjust 4 digit display to ±0.05% without range change.
  • Long Battery Life –
    3×9 volt alkaline batteries source 20 mA for over 20 hours, 12 mA for over 33 hours; 2-wire simulate and read for 150 hours. Much longer than NiCd batteries or calibrators with a single 9 V battery!
  • Drive Capability –
    1200 Ohms with current limited, fuse-less protection to 135 V AC/DC .

Altek 820 TechCheck Multifunction Process Calibrators  available at JM Test Systems

Altek 820
TechChek Multifunction Process Calibrators

Features:

  • Functions Like a Calibrator
    Milliamps, Voltage, RTD, T/C & Frequency.
  • Measures Like a Multimeter
    Measure AC/DC Volts, Ohms & Continuity.
  • Digital Accuracy with Analog Simplicity
    Speed sensitive digital pot for fast adjustment.
  • Typical Accuracy to ±0.025%
    Accurate to 0.02 mA, V or Hz, 1¡C, & 0.3 Ohms.
    Reads & Sources Standard Process Signals –
    ¡C, ¡F, mA, % 4 to 20, V, mV, Ohms, Hz & CPM.
  • Easy-to-Use
    Simple, menu-less operation.
  • User Settable Quik-Chek Switch
    Set any Span and Zero.
  • Minimum & Maximum Tracking
    Instantly recall the highest & lowest measurements.
  • Standard AA Alkaline Batteries
    Long battery life with quick battery changes.

top

 Ametek Calibrators  available at JM Test Systems  To view the Ametek Dry Block Calibrator product line, please click here.

WE ALSO REPAIR AND CALIBRATE AMETEK TEMPERATURE CALIBRATORS!CLICK HERE TO REQUEST A QUOTE.

Ametek ITC 320 Dry Block Calibrator  available at JM Test Systems Ametek ITC 320 Dry Block Calibrator

Features

  • Dual-zone heating block
  • Interchangeable inserts
  • Multi-hole insertion tubes
  • MVI Mains Variance Immunity
  • Automatic switch test
  • RS232 and JOFRACAL calibration software
  • Multi information display
  • Safety banana bushings
  • Auto stepping
  • Stability indicator
  • Count down timer (shows when unit is stable)
  • Programmable maximum temperature
  • Fast simulation/training mode
  • Re-calibration from keyboard

To view additional Ametek/Jofra Dry Block Calibrators – click here.

top


BetaGauge/Beta Gauge  Calibrators     To view the BetaGauge Calibrators product line, please click here.

WE ALSO REPAIR AND CALIBRATE BETA PRESSURE/TEMPERATURE CALIBRATORS! CLICK HERE TO REQUEST A QUOTE.

Beta Gauge 321 Temperature Pressure Calibrators  available at JM Test SystemsBeta Gauge 321 Temperature Pressure Calibrator

Dual sensor, triple display temperature pressure calibrator. The new standard of custody transfer applications.

Features:

  • Two isolated, stainless steel, pressure sensors with 0.025% F.S. accuracy
  • Temperature-compensation ensures accuracy in field applications
  • External pressure module connection supports all BETA Port-P pressure modules (25 ranges) for even more measurement capability
  • Measure 4-20 mA input
  • Measure up to 30 V DC
  • Large graphic style LCD with backlight
  • Switch test on pressure 1, pressure 2 or external pressure module
  • Operating mode layers support simple measurements to complex applications
  • Up to five frequently used setups to be stored; last setup automatically recalled on power-up
  • % Error and damping functions

 

top


Hart Field Communications Protocol     To view the Emerson Hart Communicator product line, please click here.

Hart 475 Field Communicator – User’s Manual (New!)

Build your Hart 475 Communicator here and we will send you a quote back right away!

Hart 475 Field Communicator

Hart 475 Fieldbus Communicator

Hart 375 Field Communicator  available at JM Test Systems

Hart 475 Field Communicator

Hart 475 Fieldbus Communicator w/boot

Hart 375 Field Communicator

  • An innovative full-color graphical interface
  • Powerful diagnostics from devices in the field
  • A long-lasting Lithium-Ion power module for days – not hours – of battery life
  • Quick boot up and fast operating time
  • Universal support for HART, WirelessHART, and FOUNDATION fieldbus devices

The 475 Field Communicator has a complete set of manuals, specification documents, and certifications to make your job easier.

  • An innovative full-color graphical interface
  • Powerful diagnostics from devices in the field
  • A long-lasting Lithium-Ion power module for days – not hours – of battery life
  • Quick boot up and fast operating time
  • Universal support for HART, WirelessHART, and FOUNDATION fieldbus devices

The 475 Fieldbus Communicator has a complete set of manuals, specification documents, and certifications to make your job easier.

  • Touch-screen display
  • Large physical navigation buttons
  • Comfortable one-handed operation in the field
  • Plenty of memory to allow for future expansion
  • Configuration Expansion Module holds hundreds of device configurations and it is externally accessible
  • Enhancements in the battery pack allow a full recharge in 2 hours
  • Easy Upgrade Keeps Your Communicator Current
  • User upgradeable via the Internet
  • Intrinsically safe
  • Rugged and reliable

Click here for Honeywell MCT202 Configurator/Communicator

top

Fluke-Hart Scientific calibrators  available at JM Test Systems    To view the Fluke Calibration / Hart Scientific product line, please click here.

WE ALSO REPAIR AND CALIBRATE FLUKE CALIBRATION / HART SCIENTIFIC TEMPERATURE CALIBRATORS! CLICK HERE TO REQUEST A QUOTE.

Hart Scientific 9141 Field Dry Well Temperature Calibrators  available at JM Test SystemsFluke Calibration / Hart Scientific 9141 Field Dry Well Temperature Calibrator

Features:

  • Lightweight and very portable
  • Accuracy to ±0.25 °C 
  • RS-232 and Interface-it software included 
  • Easy to recalibrate 

 

 


View Fluke Calibration / Hart Scientific Temperature Products – click here.

Temperature Calibration in Industrial Processes. Click here to learn more.

top

  

 Martel Electronics calibrators  available at JM Test Systems     To view the Martel Electronics product line, please click here.         

WE ALSO REPAIR AND CALIBRATE MARTEL PROCESS CALIBRATORS! CLICK HERE TO REQUEST A QUOTE.

Martel MC1200 Multifunction Calibrators  available at JM Test SystemsMartel MC1200 Multifunction Calibrator

Features:

  • Measure and source T/Cs (13 types), RTDs (13 types), Ohms, current, voltage, frequency; source pulse trains
  • Isolated mA/V read-back circuit for complete transmitter calibration
  • Communication port compatible with both Fluke 700 Series and Beta Calibrator pressure modules
  • Built-in 24V supply can drive 4-20 mA lops up to 1000 Ohms
  • Direct entry of custom RTD coefficients (Ro, A, B, C)
  • All source modes can be programmed with dedicated set points to speed calibration and linearity tests
  • Highest accuracy in class to 0.015% of reading
  • Meets CE requirements and is designed to IEC 1010 safety standards
  • Supplied in full rubber boot; optional carrying case available

 

Martel 3001 Precision Calibrators  available at JM Test Systems Martel 3001 Precision Calibrator

Features:

The Martel 3001 precision calibrator combines the power and features of the M2001 (voltage, current, TC, RTD and pressure) with a second completely isolated measurement channel for a single laboratory calibration instrument unmatched in versatility, performance, and value. As with every Martel calibrator, the 3001’s world-class performance and features are accessed through a very simple-to-use, intuitive user interface. The Martel 3001 is truly a “process calibration laboratory in a box.”

  • Superior calibration accuracy to 0.0025% of reading
  • Direct keyboard entry or cursor entry with decade control
  • Source/Read thermocouple (13), RTD (9), Voltage, Current, Pressure (read only)
  • Custom RTD and SPRT profiles
  • Nine (9) setpoints for each output range and type
  • Beryllium-Copper binding posts reduce thermal EMFs
  • RS232, USB and IEEE-488 remote control
  • Compatible with Fluke Met/Cal® software
  • Isolated measurement channel
  • Two (2) voltage ranges: 10V and 100 V DC
  • MilliAmp range 0 to 52 mA
  • MilliAmp range with simultaneous 24 VDC power
  • Selectable 250 Ohm HART™ resistor
  • Accuracy of 0.005% of reading on voltage ranges

top

Meriam Process Technologies - communicators  available at JM Test Systems   To view the Meriam Process Technologies product line, please click here.

Meriam 4100 Hart Communicators  available at JM Test Systems Meriam 4100 HART ® Communicator

Precision Instruments for Pressure, Flow, Temperature and Level

Features:

  • Communications 15 seconds after “On”
  • 26 hour battery life
  • Full alphanumeric keypad
  • Backlit, 13-line, pixel graphic display
  • Edit directly from Review / Edit mode
  • Clone / Upload / Download configurations
  • Numbered HART menus for quick selection
  • Soft & thumb operated Up, Dn, Select keys
  • Great ergonomics for comfort &ease of use
  • Fitted, use-in-place, carrying case w/strap
  • 9-volt battery or AC adapter power
  • HART lead kit included

View a demonstration of the Meriam 4150 Hart Communicator below.

Meriam Smart Manometer

Meriam 350 Smart Manometer Series  available at JM Test Systems

Meriam 35 Series Digital Manometers  available at JM Test Systems

Meriam M2 Series Smart Manometers  available at JM Test Systems

350 Smart Manometer Series

Precision Instruments for Pressure, Flow, Temperature and Level

35 Series Digital Manometer

Precision Instruments for Pressure, Flow, Temperature and Level

M2 Series Smart Manometers

Precision Measurement Without a Premium Price

  • Portable electronic manometer
  • Single Pressure Sensor
  • ± 0.025% FS traceable to NIST
  • Full temperature compensation from 23° to 122° F
  • Pressure ranges: vacuum to 2000 PSI
  • Differential, vacuum, gauge and absolute pressure sensors available
  • Min / Max, Hold, Damping features

 

  • One model for pressure, vacuum or differential pressure
  • One model for absolute pressure
  • Zero adjust thumb wheel knob
  • Pressure ranges: 20" wc to 100 PSI
  • ± 0.25% of Reading ± 5 counts
  • Small size (3.18"w x 6.47"l x 1.17"d)
  • Portable electronic manometer
  • ATEX Intrinsic Safety available
  • Single pressure sensor
  • ± 0.025% FS traceable to NIST
  • Full temperature compensation from 23° to 122° F
  • Superior stability
  • Pressure ranges: vacuum to 2000 PSI
  • Differential, vacuum, gauge and absolute pressure sensors available 
  • Data Logging Mode
  • Timed Leak Test Mode
  • Min/Max, Hold, Damping features
  • Small size (3.18"w x 6.47"l x 1.17"d)  

top

top

ThermoProbe thermometers  available at JM Test Systems    To view the ThermoProbe product line, please click here.

WE ALSO REPAIR AND CALIBRATE THERMOPROBE THERMOMETERS! CLICK HERE TO REQUEST A QUOTE.

ThermoProbe TL1A thermometers  available at JM Test Systems The TL-1A thermometer is intended to be used anywhere a precision glass stem thermometer or other type thermometer may be used.

The TL-1A is our latest stem thermometer. It is an improved version of the original ThermoProbe model TL-1. The TL-1A incorporates glass thermometer simplicity and reliability with the ease of a digital display. Like precision mercury thermometers, the TL-1A has accuracy, repeatability and long-term stability. But unlike those thermometers there will never be problems with mercury separation or hazardous material cleanup. Different from most electronic thermometers, the “Cordless” TL-1A has no wires to get in the way or break. Battery replacement is easily done through a sealed cover. Encoded calibration is unaffected by temperature, vibration or battery removal. Low battery display, and failure mode indications protect the user from false data.

4 Point NIST Traceable Calibration and a one year warranty included.

Click here for more information on ThermoProbe products.

top

 Buy your Pelican Cases from JM Test Systems.ProCalV5 - Professional Calibration Management Software provided by JM Test Systems.

ProCalV5 – Professional Calibration Management Software.

  • A real-time paperless calibration software solution.
  • Maximize performance, improve quality, assure timely reporting
  • Ensures your quality system is under control.
  • Designed to satisfy the strictest of compliance requirements
    • 21 CFR Part 11
    • ISO 9000-2001
    • QS 9000
    • ISO 17025
    • ANSI 254
    • and many others….

For more information regarding our calibrators, communicators and software, please contact JM Test Systems at 800-353-3411 or email us at [email protected].

top