Product Overview: CorDEX UT5000 Intrinsically Safe Thickness Gauge
CorDEX Instruments UT5000 Intrinsically Safe Thickness Gauge with CorDEX CONNECT™ measures metal thickness for Non-Destructive Testing (NDT) and Predictive Maintenance (Pdm) on pipelines and fixed equipment within hazardous locations.
UT5000 is a next-generation thickness gauge packed with proven technologies: CorDEX CONNECT uses RFID + Software to tag measurements with their location then organizes the data, giving the engineer a view of the pipeline at any specific location; the unique corrosion mode option helps identify spots of thinning; MultiECHO™ technology improves accuracy on uneven surfaces; onboard memory stores up to 1000 readings.
Designed for rugged environments, the overmoulded body protects a 3.1 inch colour screen and has easy-to-feel raised buttons. The dual-element, 4MHz transducer is adjustable up to 10Hz with accuracy of +/- 0.05mm.
|Certification:||ATEX & IECEx Certified for Zone 1 IIC T4 hazardous areas|
No hot work permit necessary
|Memory:||Stores up to 1000 measurements|
|Screen :||3.1′ RGB TFT colour screen with backlight|
Right/Left handed set up
|Material velocity selection:||Pre-loaded Drop-down menu, or user definded.|
|Pulse rate:||Standard transmit pulse rate of 4Hz|
Adjustable from single shot up to 10Hz
|Receiver Bandwidth:||1MHz to 15MHz (-3dB points)|
|Frequency:||4MHz, 3mm up to 100mm|
|RFID tag reader:||Operate with 13.54MHz passive tags|
Detection range up to 5cm
Supports ISO/IEC 15693-2, ISO/IEC 18000-3 tag formats
|Battery details:||Lithium thionyl chloride primary 3.6V cell|
100 Hours continuous operation with back light restrictions
Low battery warning
|Operating temperature:||-10 to +50C|